P0310 Code: Cylinder 10 Misfire Detected
A published detailed article is not available for this reference yet.
What the code tells you
A diagnostic trouble code identifies a condition detected by a controller. It does not identify a failed part by itself; confirm the definition for the vehicle and controller involved.
Before diagnosis
Record the VIN, engine, symptoms, all stored codes and freeze-frame data before clearing faults. Follow the manufacturer’s test procedure. If there is overheating, loss of oil pressure, severe misfire or unsafe drivability, stop safely and arrange professional assistance.
Commercial-vehicle applicability
An OBD-II code is not a substitute for a heavy-duty SPN/FMI fault definition. Identify the engine and reporting controller; use the correct service information for that configuration.
Related P-series codes
P0010
'A' Camshaft Position Actuator Circuit (Bank 1)
P0011
'A' Camshaft Position - Timing Over-Advanced (Bank 1)
P0014
'B' Camshaft Position - Timing Over-Advanced (Bank 1)
P0016
Crankshaft/Camshaft Position Correlation (Bank 1 Sensor A)
P0017
Crankshaft/Camshaft Position Correlation (Bank 1 Sensor B)
P0020
'A' Camshaft Position Actuator Circuit (Bank 2)
P0030
HO2S Heater Control Circuit (Bank 1 Sensor 1)
P0036
HO2S Heater Control Circuit (Bank 1 Sensor 2)
Parts, tools, and pros for this code
Parts pros use for this job
- •Oxygen sensor
- •Spark plugs
- •MAF sensor
Tools pros use
- •OBD-II scanner
- •Code reader
- •Smoke leak tester
Doing it yourself? Shop our partners
We may earn a small commission from partner links — it never changes the price you pay.