← Recall lookup

    2025 Toyota Tundra recalls

    Everything on this vehicle

    Data from the U.S. National Highway Traffic Safety Administration (NHTSA). Recall repairs are free at an authorized dealer. Not every vehicle of this model is affected — check your own VIN.

    EXTERIOR LIGHTING:BACK UP LIGHTS

    Campaign 25V322000 · Reported 15/05/2025 · Toyota Motor Engineering & Manufacturing

    What's wrong: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.

    Risk: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.

    Free remedy: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.

    BACK OVER PREVENTION:SOFTWARE

    Campaign 25V657000 · Reported 01/10/2025 · Toyota Motor Engineering & Manufacturing

    What's wrong: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

    Risk: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.

    Free remedy: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.

    BACK OVER PREVENTION:SOFTWARE

    Campaign 26V038000 · Reported 23/01/2026 · Toyota Motor Engineering & Manufacturing

    What's wrong: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

    Risk: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.

    Free remedy: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.

    EQUIPMENT:OTHER:LABELS

    Campaign 26V179000 · Reported 24/03/2026 · Toyota Motor Engineering & Manufacturing

    What's wrong: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

    Risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.

    Free remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.

    EQUIPMENT:OTHER:LABELS

    Campaign 26V571000 · Reported 02/09/2026 · Toyota Motor Engineering & Manufacturing

    What's wrong: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Toyota Tacoma Hybrid, 2025 Tundra Hybrid, Tundra, 2026 RAV4 Hybrid, 4Runner i-Force Max Hybrid, and 4Runner vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

    Risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, increasing the risk of a crash.

    Free remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters were mailed October 27, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 26TA18.

    Need other work done on your Toyota?

    Recalls go to the dealer — for everything else, find a trusted local shop.

    Find a shop near me