2022 Chevrolet Silverado 2500HD — Wiper Blade Sizes

Quick reference

Best aftermarket replacements

• Premium (highest durability, best all-weather performance):
  • Bosch ICON beam blades — buy 26 in (driver) + 22 in (passenger)
  • PIAA Si-Tech silicone — 26 in + 22 in
• Mid-tier (excellent value, winter-capable):
  • Rain-X Latitude Water Repellency — 26 in + 22 in
  • Michelin Stealth Ultra hybrid — 26 in + 22 in
• Value/Performance:
  • Trico Force or Trico Ice (cold climates) — 26 in + 22 in

Most modern beam or hybrid blades include multi-adapters for GM trucks. Choose the size pair above and use the J-hook adapter that comes in the box unless your arm uses a different connector.

Attachment style

The 2022 Silverado 2500HD typically uses a standard J-hook (9x3) wiper arm. This is the most common connector and works with nearly all aftermarket beam and hybrid blades via the included hook adapter.

Note: Some replacement blades ship with several adapters (hook, side pin, and push-button/pinch-tab). If your truck’s arm differs from the hook style, select the adapter that matches your arm. When in doubt, compare your arm to the diagrams in the blade’s instructions or check the owner’s manual.

How to install

1. Park, turn off the ignition, and set the wipers to the service position if available (or gently lift the arms off the glass).
2. Remove the old blade:
   • For J-hook: press the release tab on the blade, slide the blade down toward the arm’s hook, then unhook and remove.
3. Prepare the new blade: snap in the J-hook adapter if it isn’t preinstalled.
4. Install the new blade:
   • Rotate the new blade so the hook can pass through the opening, pull it up into the adapter until it clicks/locks.
5. Gently lower the arm onto the windshield. Repeat for the passenger side.
6. Test on washer fluid to confirm quiet, even wiping.

Unusual attachments: If you find a side-pin or push-button/pinch-tab style instead of a hook, use the included adapter for that connector and follow the blade’s specific instructions. Do not force-fit; an incorrect adapter can cause the blade to detach.

When to replace

• Interval: every 6–12 months, or sooner in harsh sun, salt, or freezing conditions.
• Signs it’s time:
  • Streaking or hazy film that won’t go away after a few wipes
  • Chattering, skipping, or noisy passes
  • Split, frayed, or hardened rubber; bent frame/spoiler
  • Reduced rain clearing at highway speeds

Replacing on schedule preserves visibility and helps protect the windshield from abrasive debris.

Need wipers swapped fast? Find a shop on Repairius.