Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2025 Nissan Altima Oil Capacity & Filter Reference

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2025 Nissan Altima? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2025 Nissan Altima takes 5.1 quarts (4.8 liters) of 0W-20 full synthetic oil for its 2.5L 4-cylinder engine.

    Quick Answer

    • Oil Capacity: 5.1 quarts (4.8 liters)
    • Recommended Oil Weight: 0W-20 Full Synthetic
    • Oil Specification: API SP / ILSAC GF-6B
    • OEM Oil Filter Part Number (2.5L engine): Consult dealer
    • Aftermarket Oil Filter Cross-References:
      • Fram: Consult Fram catalog for equivalent
      • Wix: Consult Wix catalog for equivalent
      • Mobil 1: Consult Mobil 1 catalog for equivalent

    Capacity by Engine Option

    For the 2025 Nissan Altima, the primary engine option is the 2.5L 4-cylinder. Some markets or trim levels may offer a 2.0L VC-Turbo engine; however, as of this writing, specific details for the 2025 model year's engine lineup and capacities are being finalized. Always verify with your owner's manual for the most accurate information regarding your specific vehicle's configuration.

    Engine TypeOil Capacity (Quarts/Liters)Recommended Oil WeightOil Specification
    2.5L 4-Cylinder5.1 quarts (4.8 liters)0W-20 Full SyntheticAPI SP / ILSAC GF-6B
    2.0L VC-Turbo (if available)Consult Owner's ManualConsult Owner's ManualConsult Owner's Manual

    Oil Change Interval

    Maintaining the correct oil change interval is crucial for the longevity of your 2025 Nissan Altima.

    • Normal Duty: Typically every 10,000 miles or 12 months, whichever comes first.
    • Severe Duty: If you operate your vehicle under severe conditions (e.g., frequent short trips, extreme temperatures, towing, dusty roads), Nissan recommends changing your oil every 5,000 miles or 6 months, whichever comes first.

    Always refer to your owner's manual for the most accurate and up-to-date service schedule for your specific vehicle.

    Drain Plug Torque

    The oil drain plug on the 2025 Nissan Altima (2.5L engine) typically requires a torque of 25 ft-lbs (34 Nm). It is highly recommended to replace the crush washer with a new one every time you perform an oil change to ensure a proper seal and prevent leaks. The crush washer is designed to deform and create a tight seal when torqued correctly.

    How to Change the Oil

    Changing the oil on your 2025 Nissan Altima is a straightforward process for the DIY enthusiast. Always ensure the engine is warm but not hot, and take proper safety precautions, such as using jack stands.

    1. Gather Supplies: New oil (0W-20 full synthetic, API SP/ILSAC GF-6B), oil filter, drain pan, wrench for the drain plug, oil filter wrench, funnel, and a new crush washer.
    2. Lift and Secure: Safely lift the front of the vehicle using a jack and secure it with jack stands.
    3. Locate Drain Plug: Place your drain pan beneath the oil pan and carefully remove the drain plug, allowing the old oil to drain completely.
    4. Replace Filter: While the oil is draining, locate and remove the old oil filter. Be prepared for some oil to spill. Install the new oil filter, ensuring the rubber gasket is lightly oiled.
    5. Reinstall Drain Plug: Once all the oil has drained, reinstall the drain plug with a new crush washer and torque it to 25 ft-lbs (34 Nm).
    6. Add New Oil: Lower the vehicle. Using a funnel, add the recommended amount of new oil (5.1 quarts for the 2.5L engine) through the engine's oil fill cap.
    7. Check Level: Start the engine and let it run for a minute to circulate the new oil. Turn off the engine, wait a few minutes, and then check the oil level using the dipstick. Add more oil if necessary.
    8. Dispose of Old Oil: Properly dispose of the old oil at an authorized recycling center.

    Common Issues / Tips

    Owners of the current generation Nissan Altima (which the 2025 model is anticipated to carry forward similar characteristics) often find the following tips helpful:

    • Continuously Variable Transmission (CVT) Maintenance: While not directly related to engine oil, regular CVT fluid changes are vital for the Altima's transmission longevity. Consult your owner's manual for the specific fluid type and interval.
    • Engine Noise (2.5L): Some owners have reported minor engine noise or ticking. Ensuring regular oil changes with the correct viscosity and specification can help mitigate potential issues.
    • Access to Oil Filter: The oil filter for the 2.5L engine is generally accessible, but an oil filter wrench designed for the specific filter size will make removal much easier.
    • Tire Pressure Monitoring System (TPMS): After any service, keep an eye on your TPMS. While unrelated to oil, it's a common post-service check for many owners.
    • Consult Your Owner's Manual: Vehicle specifications can sometimes vary slightly by trim level or region, even within the same model year. Always defer to your 2025 Nissan Altima owner's manual for the most precise and up-to-date information regarding maintenance schedules, fluid capacities, and part numbers.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Nissan Altima?

    Request service from shops in your area.

    More specs for the 2025 Nissan Altima

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email