2017 Chevrolet Suburban Paint Codes

<h2>Quick reference</h2>

Color Name	Paint Code	Type
Summit White	WA8624	Solid
Black	WA8555	Solid
Silver Ice Metallic	WA810Y	Metallic
Siren Red Tintcoat	WA130H	Pearl
Blue Velvet Metallic	WA102V	Metallic
Butte Red Metallic	WA1345	Metallic
Pepperdust Metallic	WA505Q	Metallic
Iridescent Pearl Tricoat	WA140Y	Pearl
Tungsten Metallic	WA403P	Metallic
Havana Metallic	WA102V	Metallic

<h2>Where to find your paint code</h2>

For your 2017 Chevrolet Suburban, the paint code can typically be found on a sticker located on the service parts identification (SPID) label. This label is most commonly situated in the glove compartment. Open the glove box and look for a white or silver sticker with various codes and information. Your paint code will usually start with "BC/CC" followed by a four-digit number or a two-digit letter/number combination, and then a "WA" code (e.g., BC/CC U 8624 or WA8624 for Summit White). Sometimes, you might also find a sticker on the driver's side door jamb or in the spare tire well, but the glove compartment is the primary location for Chevrolet. If you are having trouble locating it, your local Chevrolet dealership parts department can provide this information using your Vehicle Identification Number (VIN).

<h2>Best touch-up paint sources</h2>

When it comes to touching up minor scratches or chips on your 2017 Chevrolet Suburban, several reputable sources offer quality products:

• Dupli-Color: A widely available brand that offers aerosol spray cans and paint pens. You can often find Dupli-Color products at automotive parts stores. They are a good option for small chips and scratches.

• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint. They provide paint in various forms, including pens, brush bottles, and aerosol cans, precisely matched to your car's factory color code. AutomotiveTouchup is known for its accurate color matching, especially for metallic and pearl finishes.

• Tcoat custom-mix: Tcoat is another excellent online retailer that provides custom-mixed paint solutions. They require your paint code to ensure an exact match, which is crucial for achieving seamless repairs. They cater to a broad range of colors, including complex multi-stage paints.

• Dealership: Your local Chevrolet dealership can supply OEM (Original Equipment Manufacturer) touch-up paint. While potentially more expensive, OEM paint ensures the highest level of accuracy and quality, as it comes directly from the manufacturer.

<h2>How to use touch-up paint</h2>

Achieving a good result with touch-up paint requires careful application. Follow these general steps:

1. Clean the area: Thoroughly clean the damaged area with soap and water, then gently de-grease it with rubbing alcohol. Ensure the area is completely dry before proceeding.
2. Apply primer (if needed): For deeper scratches or exposed metal, a thin layer of primer is recommended. Allow it to dry completely according to the product instructions.
3. Apply base coat: Shake the touch-up paint well. Apply thin, even coats, allowing each coat to dry for the recommended time before applying the next. Build up the color gradually until it matches the surrounding paint. For metallic and pearl colors, it's important to apply correctly to ensure the metallic flakes or pearl particles lay down uniformly, preventing unwanted blotchiness.
4. Apply clear coat: Once the base coat is dry, apply a clear coat. This protects the paint and provides a glossy finish. Again, apply in thin, even layers and allow each to dry.
5. Wet sand and polish (optional): For a truly seamless repair, you can gently wet sand with very fine-grit sandpaper (2000-3000 grit) after the clear coat has fully cured, followed by polishing to blend the repair with the surrounding paint.

<h2>Color matching tips for pearls and tri-coats</h2>

Pearl and tri-coat paints, like Siren Red Tintcoat and Iridescent Pearl Tricoat, are multi-layered finishes that present a unique challenge for touch-up. These paints achieve their depth and iridescent effects through multiple layers of paint, including a colored mid-coat. To accurately match these colors:

• Follow specific instructions: Always refer to the specific instructions provided with your pearl or tri-coat touch-up paint kit. These kits will typically include separate bottles for the base coat, mid-coat (pearl layer), and clear coat.
• Apply thin, even mid-coats: The mid-coat is crucial for the pearl effect. Apply it in very thin, even layers. The number of mid-coats will affect the final color and depth, so it's often best to test on a hidden area first if possible.
• Observe in different lighting: Pearl and tri-coat colors can look different depending on the light. Check your repair in various lighting conditions to ensure a good match from all angles.
• Patience is key: These types of paints require more patience and precision. Rushing the process can lead to an uneven or unmatched finish.

For best results with complex colors, consider professional assistance from a body shop for larger repairs.

Find a trusted body shop on Repairius.