Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2018 Chevrolet Suburban Torque Specifications

    Essential Fastener Specifications for Your 2018 Chevrolet Suburban

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2018 Chevrolet Suburban? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts140 / 190
    Oil Drain Plug18 / 24Always use a new gasket
    Transmission Drain Plug18 / 24Always use a new gasket
    Brake Caliper Bracket Bolts130 / 175Loctite recommended
    Brake Caliper Slide Pins22 / 30Apply thread locker
    Front Axle Nut (2WD)155 / 210Use new nut, stake in place
    Front Axle Nut (4WD)177 / 240Use new nut, stake in place
    Spark Plugs (5.3L and 6.2L)11 / 15Apply anti-seize to threads
    Valve Cover Bolts106 in-lb / 12Tighten in sequence
    Intake Manifold Bolts (5.3L)89 in-lb / 10Tighten in sequence
    Intake Manifold Bolts (6.2L)89 in-lb / 10Tighten in sequence

    Wheel lug torque pattern

    The 2018 Chevrolet Suburban uses a star/cross pattern for lug nut torque. This ensures even pressure distribution across the wheel hub and prevents warping of the brake rotor or wheel. Begin by hand-tightening all lug nuts, then progressively tighten them to the specified torque in a star or cross pattern.

    Brake torque notes

    When working on the brakes of your 2018 Chevrolet Suburban, proper torque is paramount for safety and performance. Brake caliper bracket bolts are high-stress fasteners and often require thread-locking compound (Loctite or equivalent) to prevent loosening. Brake caliper slide pins, on the other hand, require a different type of thread locker, usually a medium-strength variety, and should be lubricated with high-temperature silicone grease to ensure smooth operation and prevent seizing. Always replace any damaged or corroded hardware. Do not reuse old cotter pins or retaining clips. Ensure that the rotor and caliper mounting surfaces are clean and free of rust or debris before assembly.

    Why torque matters

    Proper fastener torque is not just a suggestion; it

    Need service on your Chevrolet Suburban?

    Request service from shops in your area.

    More specs for the 2018 Chevrolet Suburban

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email