Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Fluid Type Specs

    2020 Chevrolet Suburban Fluid Type Specs

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2020 Chevrolet Suburban? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FluidType/SpecCapacity (approximate)
    Engine Oildexos1 Gen2 (or newer), SAE 0W-20 (5.3L/6.2L Gas) or SAE 5W-30 (3.0L Diesel)8.5 quarts (5.3L/6.2L), 7.5 quarts (3.0L Diesel)
    Engine CoolantDEX-COOL Antifreeze/Coolant16.7 quarts (5.3L/6.2L), 15.6 quarts (3.0L Diesel)
    Transmission FluidDEXRON-HP12.4 quarts (total fill)
    Transfer CaseDEXRON ULV1.7 quarts
    Front DifferentialSAE 75W-90, GM Spec 99861751.7-2.0 quarts
    Rear DifferentialSAE 75W-90, GM Spec 9986175 (with friction modifier if G80 RPO)2.5-2.8 quarts
    Brake FluidDOT 3 or DOT 4As needed
    Power SteeringDEXRON VI (automatic transmission fluid)As needed
    Washer FluidGM Optikleen or equivalent1 gallon (approx.)
    DEF (Diesel Exhaust Fluid)ISO 22241 (API 인증)5.1 gallons

    Note: Capacities are approximate and may vary based on specific vehicle configuration, build date, and service procedure. Always verify with your owner's manual or OEM service information.

    Engine Oil

    For the 2020 Chevrolet Suburban, selecting the correct engine oil is paramount for engine longevity and performance. Gasoline engines (5.3L V8 and 6.2L V8) require SAE 0W-20 full synthetic engine oil that meets the dexos1 Gen2 specification or a newer, backward-compatible dexos specification. The dexos1 Gen2 standard ensures protection against low-speed pre-ignition (LSPI), critical for modern direct-injection turbocharged engines, though your naturally aspirated Suburban also benefits from its superior protection. The oil capacity for these gasoline engines is approximately 8.5 quarts.

    For the 3.0L Duramax diesel engine, an SAE 5W-30 full synthetic diesel engine oil is specified. This oil must meet the appropriate diesel engine oil standards, typically API CK-4 or a newer specification, and the specific GM diesel engine oil specification. The capacity for the diesel engine is approximately 7.5 quarts.

    Maintenance Interval: It is recommended to follow the Oil Life Monitoring (OLM) system for oil change intervals. This system takes into account driving conditions and will alert you when an oil change is due. Typically, this can range from 7,500 to 10,000 miles or once a year, whichever comes first.

    Common Pitfalls: Using conventional oil or an oil that does not meet the dexos1 specification for gasoline engines can lead to increased engine wear and potential damage. For diesel engines, using gasoline engine oil or an oil not meeting the correct diesel specifications can severely impact exhaust aftertreatment systems and engine performance.

    Engine Coolant

    The 2020 Chevrolet Suburban utilizes DEX-COOL Antifreeze/Coolant, which is an Organic Acid Technology (OAT) coolant, typically orange or sometimes pink in color. This specialized coolant is designed for extended service intervals and provides excellent corrosion protection for aluminum engine components. Never mix DEX-COOL with other types of coolant (e.g., HOAT, IAT) as this can lead to gel formation, system blockages, and severe damage to the cooling system and engine. The capacity for the gasoline engines is around 16.7 quarts, while the diesel engine holds approximately 15.6 quarts.

    Maintenance Interval: DEX-COOL has an extended service life, typically recommended for replacement every 5 years or 100,000 to 150,000 miles, whichever comes first. However, it

    Need service on your Chevrolet Suburban?

    Request service from shops in your area.

    More specs for the 2020 Chevrolet Suburban

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email