Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Fuse Box Diagram & Amperage

    2025 Chevrolet Suburban Fuse Box Diagram & Amperage

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2025 Chevrolet Suburban? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    The 2025 Chevrolet Suburban features multiple fuse box locations to protect its electrical systems. You'll find fuse boxes under the hood, behind the passenger side kick panel (dashboard), and in the rear cargo area.


    Under-hood Fuse Box

    The under-hood fuse box is typically located on the driver's side of the engine compartment, near the battery. It houses fuses and relays for critical engine functions, cooling systems, and other high-current accessories.

    Fuse #AmpColorCircuit / Component Protected
    F115ABlueECM/PCM (Engine Control Module/Powertrain Control Module)
    F220AYellowFuel Pump
    F325ANaturalIgnition
    F430AGreenStarter Relay
    F510ARedHeadlights Low Beam (Left)
    F610ARedHeadlights Low Beam (Right)
    F715ABlueHeadlights High Beam (Left)
    F815ABlueHeadlights High Beam (Right)
    F940AGreenBlower Motor (HVAC)
    F1010ARedA/C Clutch
    F1125ANaturalABS Module
    F1220AYellowTrailer Brake Control (if equipped)
    R1--Fuel Pump Relay
    R2--Starter Relay
    R3--HVAC Blower Relay
    R4--A/C Clutch Relay

    Note: Fuse numbers and amperages may vary slightly based on specific trim levels and optional equipment. Always refer to the fuse diagram printed on the inside of your fuse box lid for the most accurate information.


    Passenger Side Kick Panel Fuse Box

    This fuse box, often referred to as the instrument panel fuse box, is located behind the passenger side kick panel, typically accessible by removing a small trim panel. It protects various interior electrical components and accessories.

    Fuse #AmpColorCircuit / Component Protected
    F110ARedRadio/Infotainment System
    F215ABlueCigar Lighter / 12V Power Outlet (Front)
    F310ARedAirbag System (SIR)
    F47.5ABrownCabin Fuse Box Power
    F55ATanTail/Park Lights (Left)
    F65ATanTail/Park Lights (Right)
    F710ARedBrake Lights
    F815ABlueInterior Lighting
    F920AYellowPower Windows (Front)
    F1010ARedHVAC Control Module

    Note: The exact configuration of fuses can vary by trim and options. Consult your owner's manual or the fuse box lid diagram for precise details.


    Rear Cargo Area Fuse Box

    The third fuse box is generally located in the rear cargo area, often on the driver's side, behind a trim panel. This fuse box typically handles power for rear accessories, trailer wiring, and some auxiliary systems.

    Fuse #AmpColorCircuit / Component Protected
    F115ABlue12V Power Outlet (Rear)
    F220AYellowTrailer Power (constant)
    F310ARedRear Wiper
    F415ABlueLiftgate Module
    F525ANaturalPower Liftgate (if equipped)
    F610ARedRear HVAC (if equipped)

    Note: Variations may exist based on your Suburban's specific features. Always cross-reference with the diagram on the fuse box cover.


    How to Test a Fuse

    Testing a fuse is a straightforward process. You'll need a fuse puller (usually found in the fuse box or with your vehicle's tools) and a multimeter or a fuse tester.

    1. Locate the suspected fuse: Refer to the appropriate fuse box diagram to identify the fuse for the circuit that's not working.
    2. Turn off the ignition: Ensure the vehicle's ignition is off to prevent electrical surges or injury.
    3. Remove the fuse: Use the fuse puller to carefully extract the fuse from its slot. Never use metal tools that could short the circuit.
    4. Visually inspect: Many fuses have a visible wire element inside. If this wire is broken or melted, the fuse is blown. However, some modern fuses might not show a clear break.
    5. Test with a multimeter (recommended): Set your multimeter to the continuity setting (often indicated by an audible beep or a diode symbol). Touch one probe to each metal blade of the fuse.
      • If the multimeter beeps or shows a reading close to zero ohms (indicating continuity), the fuse is good.
      • If there's no beep or no reading (open circuit), the fuse is blown.
    6. Replace (if blown): If the fuse is blown, replace it with a new fuse of the exact same amperage and type. Using a fuse with a higher amperage can cause severe electrical damage or even a fire.

    Common Blown Fuses on This Vehicle

    While any fuse can blow, some circuits are subject to more stress or common failure points. For the 2025 Chevrolet Suburban, common culprits for blown fuses include:

    • Cigar Lighter / 12V Power Outlets: These fuses often blow due to overloads from charging multiple devices or using high-power accessories. If your 12V outlets aren't working, check these first.
    • Radio/Infotainment System: Issues with aftermarket accessories, faulty wiring, or even internal issues with the unit can sometimes cause this fuse to blow. If your infotainment system is completely dead, start here.
    • Trailer Power/Brake Fuses: If you frequently tow or have issues with your trailer's electrical systems, these fuses can blow, especially if there's a short in the trailer's wiring.
    • Blower Motor: A failing blower motor or an obstruction in the HVAC system can cause the blower motor fuse to blow due to excessive current draw. If your climate control fan isn't working, check the under-hood blower motor fuse.

    Always check for the underlying cause: Simply replacing a blown fuse without addressing the root cause will likely result in the new fuse blowing again. If a fuse blows repeatedly, it indicates a deeper electrical issue that needs professional diagnosis.

    Find a trusted shop on Repairius.

    Before you pull a fuse on the 2025 Chevrolet Suburban

    • Use the label printed on the panel cover or the owner's manual for your exact build. Layouts change with options, model year and build date, so a chart for another truck can be wrong.
    • Replace a blown fuse only with the same amp rating. A larger fuse can let wiring overheat.
    • A fuse that blows again right away means a short or failing component downstream. Find the cause before replacing it again.
    • A good fuse doesn't prove the circuit works — relays, grounds and connectors fail too.
    • Disconnect the battery before working near high-current fuses or cables.

    Learn more: How fuses, relays and truck electrical systems work

    Need service on your Chevrolet Suburban?

    Request service from shops in your area.

    More specs for the 2025 Chevrolet Suburban

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email