2021 Chevrolet Tahoe Paint Codes

Quick reference

Where to find your paint code

For most 2021 Chevrolet Tahoe vehicles, you'll find the paint code label on the Service Parts Identification (SPID) sticker. This sticker is typically located on the glove box door or in the glove box compartment itself. Less commonly, it might be found on the driver's side door jamb or in the spare tire well. The paint code will be listed under the "EXTERIOR" section, usually starting with a "WA" followed by a four-digit number, often with a corresponding three-character alphanumeric code (e.g., GAZ or GBA).

Best touch-up paint sources

Dupli-Color: A widely available option at most auto parts stores. Dupli-Color offers exact-match touch-up paint in pens, bottles with brushes, and aerosol cans. Ensure you check the paint code carefully before purchasing.

AutomotiveTouchup: This online retailer specializes in custom-mixed touch-up paint for virtually every make and model. They boast a high degree of color accuracy and offer a range of products, including pens, bottles, spray cans, and larger quantities for more extensive repairs. They also provide primer, clear coat, and other necessary accessories.

Tcoat Custom-Mix: Tcoat is another excellent online resource for high-quality, custom-mixed touch-up paints. They use your specific paint code to create a precise match, especially beneficial for metallic or pearl finishes. Their kits often include everything you need for a professional-looking repair.

Dealership: Your local Chevrolet dealership parts department can order touch-up paint specifically matched to your VIN. While often a bit more expensive, this is a surefire way to ensure the most accurate color match directly from the manufacturer.

How to use touch-up paint

1. Clean: Thoroughly clean the damaged area with soap and water, then use a wax and grease remover to ensure a clean surface for adhesion.
2. Primer (if needed): If the scratch or chip has gone down to the bare metal or plastic, apply a thin layer of primer. Allow it to dry completely according to the product instructions.
3. Base Coat: Apply thin, even coats of your chosen touch-up paint. Build up the color slowly, allowing each coat to dry before applying the next. For metallic or pearl colors, ensure you apply several light coats for consistent flake or pearl distribution.
4. Clear Coat: Once the base coat is dry, apply several thin layers of clear coat to protect the paint and provide a glossy finish. This is crucial for durability and matching the surrounding paint's sheen.
5. Cure: Allow the touch-up paint to fully cure according to the product