Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2024 Chevrolet Tahoe – Torque Specifications

    Everything on this vehicle

    Working on this 2024 Chevrolet Tahoe? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts140 ft-lb (190 Nm)Star/Cross pattern
    Oil Drain Plug18-20 ft-lb (24-27 Nm)Verify application, replace washer/gasket
    Transmission Drain Plug18-22 ft-lb (24-30 Nm)Verify application, replace washer/gasket
    Front Brake Caliper Bracket Bolts148 ft-lb (200 Nm)
    Front Brake Caliper Slide Pins22-25 ft-lb (30-34 Nm)Apply threadlocker if specified
    Rear Brake Caliper Bracket Bolts148 ft-lb (200 Nm)
    Rear Brake Caliper Slide Pins22-25 ft-lb (30-34 Nm)Apply threadlocker if specified
    Front Axle Nut177 ft-lb (240 Nm)New nut typically required, stake if applicable
    Spark Plugs (Gas)11-15 ft-lb (15-20 Nm)Varies by engine: 5.3L V8, 6.2L V8, 3.0L Duramax
    Valve Cover Bolts89 in-lb (10 Nm)Initial pass then final pass, follow sequence
    Intake Manifold Bolts89 in-lb (10 Nm)Initial pass then final pass, follow sequence

    Wheel Lug Torque Pattern

    For the 2024 Chevrolet Tahoe, wheel lug nuts should always be tightened in a star or cross pattern. This ensures even seating of the wheel against the hub, preventing warping of the rotor or uneven stress on the wheel studs. Always tighten the lug nuts in several stages, gradually increasing torque until the final specification is reached.

    Brake Torque Notes

    When servicing the brakes on your 2024 Chevrolet Tahoe, paying close attention to torque specifications is crucial for safety and performance. Brake caliper bracket bolts are typically high-torque fasteners and must be tightened to specifications to ensure the caliper is securely mounted. Caliper slide pins, while lower torque, are equally important as they allow the caliper to float freely and facilitate even pad wear. Always clean threads thoroughly before assembly. For slide pins, check for any manufacturer recommendations regarding lubrication or threadlocker use.

    Why Torque Matters

    Proper torque application is paramount in automotive repair. Under-torqued fasteners can loosen over time due to vibration and stress, leading to components failing, leaks, or even catastrophic safety issues. This is especially critical for components like wheel lug nuts, brake system fasteners, and axle nuts. Conversely, over-torquing can stretch or strip threads, damage fasteners, or warp components, which can also lead to failure and costly repairs. Using a calibrated torque wrench and following manufacturer specifications ensures that each fastener provides the correct clamping force, securing components reliably and safely.

    Beyond safety, correct torque helps maintain the integrity of seals and gaskets, preventing leaks from the oil pan, transmission, and other fluid-containing components. For spark plugs, proper torque ensures good heat transfer and prevents blow-by or damage to the cylinder head.

    Disclaimer

    While we strive for accuracy, these specifications are provided for reference only. Due to variations in models, engines, and specific component manufacturers, it is imperative to verify all critical fastener torque specifications in the official OEM service manual for your specific 2024 Chevrolet Tahoe before performing any work. Failure to do so can result in serious injury or damage to your vehicle.

    Find a trusted shop on Repairius.

    Need service on your Chevrolet Tahoe?

    Request service from shops in your area.

    More specs for the 2024 Chevrolet Tahoe

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email