2018 Jeep Grand Cherokee Paint Codes

Quick Reference

Where To Find Your Paint Code

The paint code for your 2018 Jeep Grand Cherokee is located on the driver's side door jamb. Open the driver's door and look for a black sticker on the B-pillar. This sticker contains a variety of information about your vehicle, including the VIN, tire pressure recommendations, and the paint code. The paint code is typically a three-digit code and is clearly labeled as "PAINT".

Best Touch-Up Paint Sources

Once you have your paint code, you have several options for purchasing touch-up paint:

• Dupli-Color: A popular and widely available brand, Dupli-Color offers a range of paint products, including pens, aerosol cans, and brush-in-bottle applicators. They have a color-match guarantee and are an excellent choice for small chips and scratches.
• AutomotiveTouchup: This online retailer specializes in perfectly matched automotive paint. They can mix your specific color in a variety of formats, including pens, bottles, and spray cans. They are a great option for achieving a professional-looking repair.
• T-Coat Custom Mix: For a truly custom solution, T-Coat can mix your paint to order. This is a good choice if you have a rare color or are looking for the absolute best match possible. You can find them at most automotive paint supply stores.
• Jeep Dealership: Your local Jeep dealership can also provide you with touch-up paint. This is a convenient option, but it may be more expensive than other sources.

How To Use Touch-Up Paint

Using touch-up paint is a relatively simple process, but it's important to follow the correct steps to achieve a good result:

1. Clean the area: The first step is to thoroughly clean the area to be repaired. Use a wax and grease remover to ensure that the surface is free of any contaminants.
2. Apply primer: If the scratch or chip has gone down to the bare metal, you will need to apply a thin layer of primer. This will help the paint to adhere to the surface and will prevent rust.
3. Apply the base coat: Once the primer is dry, you can apply the base coat. This is the colored layer of paint. Apply several thin coats, allowing each coat to dry completely before applying the next.
4. Apply the clear coat: The clear coat is the final layer and provides protection for the paint. It also gives the paint its gloss. Apply two to three thin coats of clear coat, allowing each coat to dry completely.

Color Matching Tips for Pearls and Tri-Coats

Pearl and tri-coat paints can be more challenging to match than solid colors. This is because they contain metallic or pearlescent flakes that reflect light in different ways. When touching up a pearl or tri-coat paint, it is important to:

• Use a test card: Before applying the paint to your vehicle, test it on a small, inconspicuous area. This will allow you to see how the color will look in different lighting conditions.
• Blend the paint: When applying the paint, be sure to blend it into the surrounding area. This will help to create a seamless repair.
• Use a high-quality clear coat: A high-quality clear coat will help to protect the paint and will give it a deep, rich gloss.

If you are not confident in your ability to match a pearl or tri-coat paint, it is best to leave it to a professional. A qualified body shop will have the experience and equipment to achieve a perfect match.

Find a trusted body shop on Repairius.