2025 Chevrolet Silverado 1500 Oil Capacity & Filter Guide

Quick answer:

The 2025 Chevrolet Silverado 1500 takes between 6.0 to 8.0 quarts (5.7 to 7.6 liters) of oil, depending on the engine.

• Oil Capacity & Type:
  • 2.7L Turbo I4 (L3B): 6.0 quarts (5.7 liters) of 0W-30 full synthetic oil, meeting dexos1 Gen3 or API SP specifications.
  • 5.3L V8 (L84/L8P): 8.0 quarts (7.6 liters) of 0W-20 full synthetic oil, meeting dexos1 Gen3 or API SP specifications.
  • 6.2L V8 (L87): 8.0 quarts (7.6 liters) of 0W-20 full synthetic oil, meeting dexos1 Gen3 or API SP specifications.
  • 3.0L Duramax I6 (LZ0): 7.0 quarts (6.6 liters) of 0W-20 full synthetic diesel engine oil, meeting dexosD or API CK-4 specifications.
• Recommended Oil Weight:
  • Gasoline Engines: 0W-20 or 0W-30 (consult your owner's manual for specific engine recommendations)
  • Diesel Engine: 0W-20
• Oil Specification:
  • Gasoline Engines: dexos1 Gen3 or API SP equivalent
  • Diesel Engine: dexosD or API CK-4 equivalent
• Oil Filter Part Numbers:
  • 2.7L Turbo I4 (L3B):
    • OEM: Consult dealer
    • Fram: Consult dealer
    • Wix: Consult dealer
  • 5.3L V8 (L84/L8P) & 6.2L V8 (L87):
    • OEM: 12690388
    • Fram Ultra Synthetic: XG12060
    • Wix XP: 57060XP
    • Mobil 1 Extended Performance: M1C-258A
  • 3.0L Duramax I6 (LZ0):
    • OEM: 12711696
    • Fram: Consult dealer
    • Wix: Consult dealer

Capacity by Engine Option:

Oil Change Interval:

For the 2025 Chevrolet Silverado 1500, the oil change interval is primarily dictated by the vehicle's Oil Life Monitoring (OLM) system. This system takes into account various factors such as engine revolutions, engine temperature, and driving conditions to determine when an oil change is necessary.

• Normal Duty: Follow the OLM system, which typically recommends oil changes every 7,500 to 10,000 miles or 12 months, whichever comes first.
• Severe Duty: If you frequently drive in demanding conditions such as heavy towing, off-roading, extreme temperatures, or prolonged idling, the OLM system will likely recommend more frequent oil changes. It is generally advisable to consider an oil change every 3,000 to 5,000 miles or every 6 months under severe duty conditions, even if the OLM system has not yet activated the oil change light. Always refer to your owner's manual for specific severe duty recommendations.

Drain Plug Torque:

Properly torquing the drain plug is crucial to prevent leaks and avoid damaging the oil pan. For the 2025 Chevrolet Silverado 1500:

• Gasoline Engines (2.7L, 5.3L, 6.2L): The typical drain plug torque specification is 18 lb-ft (25 Nm). It is highly recommended to use a new crush washer with each oil change to ensure a proper seal and prevent leaks. The crush washer is a single-use item that deforms to create a seal.
• 3.0L Duramax I6 (LZ0): The typical drain plug torque specification is 22 lb-ft (30 Nm). Similarly, a new crush washer should be used with each oil change.

Always double-check the exact torque specification in your owner's manual, as specifications can sometimes vary slightly.

How to change the oil:

Changing the oil on your 2025 Chevrolet Silverado 1500 is a straightforward maintenance task that can be done at home with the right tools.

1. Gather Supplies: You'll need the correct type and amount of oil, a new oil filter, a new drain plug crush washer, an oil filter wrench, a drain pan, a ratchet and socket for the drain plug, gloves, and safety glasses.
2. Warm Up Engine (Optional but Recommended): Drive the truck for 5-10 minutes to warm the oil, allowing it to drain more easily. Be careful, as the oil will be hot.
3. Lift and Secure Vehicle: Safely lift the front of the truck using a jack and secure it with jack stands. Ensure the vehicle is level or slightly elevated at the front for better drainage.
4. Locate Drain Plug and Drain Oil: Place the drain pan beneath the oil pan. Using the correct socket, carefully loosen and remove the drain plug. Allow all the old oil to drain completely. Inspect the old crush washer.
5. Replace Drain Plug: Once drained, clean the drain plug and install a new crush washer. Reinstall the drain plug and torque it to the specified setting (18 lb-ft for gas, 22 lb-ft for diesel).
6. Remove Old Oil Filter: Place the drain pan under the oil filter housing. Use an oil filter wrench to loosen and remove the old oil filter. Be prepared for some residual oil to spill.
7. Install New Oil Filter: Lightly coat the rubber gasket of the new oil filter with fresh engine oil. Screw on the new oil filter by hand until it's snug, then tighten it an additional 3/4 to 1 turn (or as per filter manufacturer's instructions). Do not overtighten.
8. Add New Oil: Remove the oil filler cap on the engine. Slowly pour in the recommended amount and type of new oil. Use a funnel to prevent spills.
9. Check Oil Level: After adding the oil, wait a few minutes for it to settle, then check the oil level using the dipstick. Add more oil if necessary to reach the