2015 Nissan Altima Torque Specifications
Key fastener torque specifications for the 2015 Nissan Altima
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2015 Nissan Altima? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel lug nuts | 83 / 113 | |
| Oil drain plug | 25 / 34 | |
| Transmission drain plug | 25 / 34 | |
| Front brake caliper bracket bolts | 70-80 / 95-108 | |
| Front brake caliper slide pins | 25-35 / 34-47 | |
| Rear brake caliper bracket bolts | 45-55 / 61-75 | |
| Rear brake caliper slide pins | 20-30 / 27-41 | |
| Axle nut | 180-190 / 244-258 | |
| Spark plugs | 18 / 24 | |
| Valve cover bolts | 7-9 / 9-12 | |
| Intake manifold bolts | 11-13 / 15-18 |
Wheel lug torque pattern
When tightening the wheel lug nuts on your 2015 Nissan Altima, it is crucial to follow a star or cross pattern. This ensures that the wheel is seated evenly against the hub, preventing warping of the brake rotor and ensuring a secure fit. Start by tightening one lug nut, then move to the one opposite it, and continue in this pattern until all lug nuts are tightened to the initial snug-tight specification. Finally, lower the vehicle and tighten all lug nuts to the final torque specification in the same star pattern.
Brake torque notes
Properly torqueing brake components is critical for safe and effective braking. The brake caliper bracket bolts are a high-torque fastener and should be cleaned and inspected before reinstallation. If the bolts are corroded or damaged, they should be replaced. The brake caliper slide pins should be lubricated with a high-quality silicone-based brake grease to ensure smooth operation of the caliper. When tightening the slide pins, be careful not to over-torque them, as this can damage the caliper or the slide pins themselves.
Why torque matters
Torque is the rotational equivalent of force, and it is a critical measurement in automotive repair. Every fastener on your vehicle has a specific torque specification that is determined by the engineers who designed it. This specification ensures that the fastener is tight enough to hold the components together securely, but not so tight that it damages the fastener or the components it is holding. Over-tightening a fastener can stretch the threads, causing it to fail, while under-tightening can allow the fastener to loosen over time, which can have disastrous consequences. Using a torque wrench to tighten fasteners to the correct specification is one of the most important things you can do to ensure the safety and reliability of your vehicle.
Disclaimer: The information in this article is for general reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle before performing any repairs.
Find a trusted shop on Repairius.
More specs for the 2015 Nissan Altima
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2015 Nissan Altima Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.