2023 Nissan Altima Oil Capacity & Filter

The 2023 Nissan Altima takes 5.1 quarts (4.8 liters) of 0W-20 engine oil for both the 2.5L four-cylinder and the 2.0L VC-Turbo engines.

Quick Answer

• Oil Capacity: 5.1 quarts (4.8 liters)
• Recommended Oil Weight: 0W-20
• Oil Type Specification: API SN or higher, or ILSAC GF-6A
• Oil Filter (2.5L & 2.0L VC-Turbo):
  • OEM: Nissan P/N 15208-65F0E (or consult dealer for the latest part number)
  • Fram: PH6607
  • Wix: 51356
  • Mobil 1: M1-108A

Capacity by Engine Option

Oil Change Interval

Nissan recommends the following oil change intervals for the 2023 Altima:

• Normal Duty: Every 10,000 miles or 12 months, whichever comes first.
• Severe Duty: Every 5,000 miles or 6 months, whichever comes first. This applies if you frequently drive short distances, in dusty conditions, tow a trailer, or operate in extreme temperatures.

Drain Plug Torque

The oil drain plug on the 2023 Nissan Altima should be torqued to 25 ft-lbs (34 Nm). Always use a new crush washer to ensure a proper seal and prevent leaks. The crush washer is typically a 12mm ID aluminum or copper washer.

How to Change the Oil

Changing the oil on your 2023 Nissan Altima is a straightforward process:

1. Safely lift and support the front of the vehicle using jack stands.
2. Locate the oil drain plug on the oil pan and place a drain pan underneath.
3. Remove the drain plug and allow the old oil to fully drain.
4. Once drained, reinstall the drain plug with a new crush washer and torque to specification.
5. Locate and remove the old oil filter. Be prepared for some oil to spill.
6. Apply a thin film of new oil to the gasket of the new oil filter.
7. Install the new oil filter and hand-tighten until snug, then turn an additional 3/4 to 1 full turn (or as per filter manufacturer's instructions).
8. Lower the vehicle and fill the engine with the recommended amount and type of new oil through the oil filler cap.
9. Start the engine and let it run for a few minutes, then check for any leaks around the drain plug and oil filter.
10. Turn off the engine, wait a few minutes, and then check the oil level with the dipstick. Add more oil if necessary to reach the "FULL" mark.

Common Issues / Tips

• VC-Turbo Engine Oil Consumption: Some owners of the 2.0L VC-Turbo engine, carried over from previous years, have reported higher-than-average oil consumption. Regularly check your oil level between changes, especially if you notice a decrease.
• Plastic Undercarriage Shield: The Altima features a plastic undercarriage shield that often needs to be removed or partially lowered to access the oil drain plug and filter. Be gentle with the plastic clips and fasteners to avoid breaking them.
• Correct Oil Viscosity: Nissan specifically calls for 0W-20 oil. Using a different viscosity can affect fuel economy and engine longevity, especially with the advanced VC-Turbo engine.
• Genuine Nissan Filters: While aftermarket filters are available, some owners prefer genuine Nissan oil filters for optimal fit and performance. Consult your Nissan dealer for the latest OEM part number.

Need an oil change? Find a trusted shop on Repairius.