2022 Nissan Frontier Oil Capacity, Type, and Filter

The 2022 Nissan Frontier with the 3.8L V6 engine requires 5.3 quarts (5.0 liters) of 0W-20 synthetic oil.

Quick answer

• Oil capacity (with filter): 5.3 qts / 5.0 L
• Recommended oil weight: 0W-20
• Oil specification: API SN or SP / ILSAC GF-6A
• Oil filter (OEM): Nissan 15208-65F0E
• Oil filter (Fram): PH6607
• Oil filter (Wix): 51365
• Oil filter (Mobil 1): M1-108A

Capacity by engine option

The 2022 Nissan Frontier is available with only one engine option, the 3.8L V6, which has an oil capacity of 5.3 quarts.

Oil change interval

For normal driving conditions, the recommended oil change interval is every 7,500 miles or 12 months, whichever comes first. For severe duty (towing, frequent short trips, dusty conditions), the interval is every 5,000 miles.

Drain plug torque

The oil drain plug should be torqued to 25 ft-lbs. It is also recommended to replace the crush washer with each oil change.

How to change the oil

1. Warm up the engine for a few minutes to allow the oil to flow more easily.
2. Position a drain pan under the oil pan and remove the drain plug.
3. Allow the oil to drain completely, then replace the drain plug and tighten to 25 ft-lbs.
4. Remove the old oil filter. Be sure the old filter's gasket comes off with it.
5. Apply a thin layer of new oil to the new filter's gasket.
6. Install the new filter and tighten it until it is snug, then give it an additional quarter turn.
7. Fill the engine with 5.3 quarts of 0W-20 synthetic oil.
8. Start the engine and check for leaks.

Common issues / tips

The 2022 Nissan Frontier is a relatively new model, so there are not many common issues to report. However, it is always a good practice to check the oil level regularly and to be aware of any unusual noises or leaks. When changing the oil, be sure to use a high-quality oil and filter to protect your engine.

Need an oil change? Find a trusted shop on Repairius.