2025 Nissan Rogue Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2025 Nissan Rogue? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 83 ft-lb / 113 Nm | |
| Oil Drain Plug | 25 ft-lb / 34 Nm | |
| Transmission Drain Plug | 20 ft-lb / 27 Nm | |
| Front Brake Caliper Bracket Bolts | 103 ft-lb / 140 Nm | |
| Front Brake Caliper Slide Pins | 23 ft-lb / 31 Nm | |
| Rear Brake Caliper Bracket Bolts | 55 ft-lb / 75 Nm | |
| Rear Brake Caliper Slide Pins | 23 ft-lb / 31 Nm | |
| Axle Nut | 148 ft-lb / 201 Nm | Stake nut after torquing |
| Spark Plugs | 14-18 ft-lb / 19-24 Nm | |
| Valve Cover Bolts | 6-8 ft-lb / 8-11 Nm | In sequence |
| Intake Manifold Bolts | 12-15 ft-lb / 16-20 Nm | In sequence |
Wheel Lug Torque Pattern
When tightening the wheel lug nuts on your 2025 Nissan Rogue, it is crucial to follow a star or cross pattern. This ensures that the wheel is seated evenly against the hub, preventing warping of the brake rotors and ensuring a secure fit. Start with one lug nut, then tighten the one directly across from it. Move to the next lug nut and tighten the one across from it, continuing until all lug nuts are snug. After this initial snugging, lower the vehicle so the tires are just touching the ground, and then use a torque wrench to tighten each lug nut to the final specification of 83 ft-lb (113 Nm) in the same star pattern.
Brake Torque Notes
Proper torque on brake components is a critical safety measure. For the 2025 Nissan Rogue, the front brake caliper bracket bolts require a substantial 103 ft-lb (140 Nm) of torque. These bolts are what hold the entire brake caliper assembly to the steering knuckle. The rear brake caliper bracket bolts require less torque at 55 ft-lb (75 Nm). The brake caliper slide pins, which allow the caliper to move freely, require a much lower torque of 23 ft-lb (31 Nm) for both the front and rear brakes. It is also a good practice to apply a thin layer of high-temperature brake grease to the slide pins to ensure smooth operation.
Why Torque Matters
Using a calibrated torque wrench to tighten fasteners to their specified torque is one of the most important aspects of vehicle maintenance and repair. Over-tightening a fastener can stretch the threads, leading to bolt failure or damage to the component it is threaded into. For example, over-tightening a valve cover bolt can warp the valve cover, causing an oil leak. Under-tightening a fastener is equally dangerous. A loose wheel lug nut can cause the wheel to wobble and eventually come off the vehicle. An under-torqued brake caliper bolt could lead to a catastrophic brake failure.
The torque specifications provided by the manufacturer are the result of extensive engineering and testing. They are designed to ensure that each fastener has the correct amount of clamping force to do its job effectively and safely for the life of the vehicle. Always use a quality torque wrench and follow the correct procedures.
Disclaimer: The torque specifications provided in this article are for quick reference only. It is always recommended to consult the official OEM service manual for your specific vehicle before performing any maintenance or repairs. Critical fasteners and their torque specifications should always be verified in the OEM service manual.
Find a trusted shop on Repairius.
More specs for the 2025 Nissan Rogue
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2025 Nissan Rogue Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.