2021 Nissan Titan—Oil Capacity & Filter Specs

The 2021 Nissan Titan with the 5.6L V8 engine takes 6.0 quarts (5.7 liters) of 0W-20 full synthetic engine oil.

Quick Answer

• Oil Capacity: 6.0 US Quarts (5.7 Liters)
• Recommended Oil Weight: 0W-20 Full Synthetic
• Oil Type Specification: API SN or higher (e.g., API SP) or ILSAC GF-6
• Oil Filter:
  • OEM Part Number: 15208-89F0A (Consult your Nissan dealer for the most up-to-date information)
  • Fram Cross-Reference: PH6607
  • Wix Cross-Reference: 57356
  • Mobil 1 Cross-Reference: M1-110

Capacity by Engine Option

All 2021 Nissan Titan models came equipped with the 5.6-liter "Endurance" V8 engine (VK56VD).

Oil Change Interval

Nissan recommends adhering to two different maintenance schedules, depending on your driving conditions:

• Normal Duty: Every 10,000 miles or 12 months, whichever comes first.
• Severe Duty: Every 5,000 miles or 6 months, whichever comes first. Severe duty conditions include frequent short trips, extensive idling, towing, driving in dusty conditions, or extreme temperatures.

Drain Plug Torque

The oil drain plug for the 2021 Nissan Titan should be torqued to 25 ft-lbs (34 Nm). Always use a new crush washer with each oil change to ensure a proper seal and prevent leaks. The crush washer is typically a 12mm x 20mm x 2mm aluminum or copper washer.

How to Change the Oil

Changing the oil in your 2021 Nissan Titan is a straightforward process:

1. Warm up the engine slightly for better oil flow, then park on a level surface and engage the parking brake.
2. Locate the oil drain plug on the oil pan beneath the engine. Place a drain pan underneath.
3. Carefully remove the drain plug with a wrench and allow all the old oil to drain completely.
4. Once drained, clean the drain plug, install a new crush washer, and reinstall the drain plug, torquing it to 25 ft-lbs.
5. Locate the oil filter, typically on the passenger side of the engine block. Place a small drain pan beneath it.
6. Unscrew the old oil filter. Be aware that some oil will spill.
7. Apply a thin film of new engine oil to the gasket of the new oil filter.
8. Screw on the new oil filter by hand until it is snug, then tighten it an additional 3/4 to 1 full turn. Do not overtighten.
9. Remove the oil fill cap on top of the engine and slowly add 6.0 quarts of the recommended 0W-20 full synthetic oil.
10. Replace the oil fill cap, start the engine, and let it run for a few minutes to circulate the new oil. Check for leaks.
11. Turn off the engine, wait a few minutes for the oil to settle, and check the oil level with the dipstick. Add more oil if necessary to bring it to the "Full" mark.
12. Reset the oil change reminder light on your dashboard.

Common Issues / Tips

• Oil Consumption: While not widespread, some VK56VD engines can exhibit slight oil consumption, especially with higher mileage. Regularly check your oil level between changes.
• Oil Filter Placement: The oil filter on the VK56VD is relatively accessible, but ensure you have a proper oil filter wrench for removal.
• OEM vs. Aftermarket Filters: While aftermarket filters from reputable brands are generally fine, some owners prefer OEM filters for peace of mind and exact fitment. Always ensure any aftermarket filter meets or exceeds Nissan's specifications.
• Synthetic Oil Benefits: The 0W-20 full synthetic oil specified for the 2021 Titan offers superior protection in extreme temperatures, better sludge resistance, and improved fuel economy compared to conventional oils.

Need an oil change? Find a trusted shop on Repairius.