Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Tire Size & Pressure

    2022 Nissan Titan — Tire Size & Pressure Specs

    Everything on this vehicle

    OEM tire sizes, door-placard pressures, bolt pattern, wheel specs, and TPMS info

    Working on this 2022 Nissan Titan? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer

    • OEM tire sizes (most common):
      • Titan S, SV: P265/70R18
      • Titan PRO-4X: P275/65R18 (all-terrain)
      • Titan Platinum Reserve: P275/60R20
      • Titan XD (heavy-duty variant): LT265/70R18 E; optional LT275/60R20 E
    • Recommended cold tire pressure (door placard):
      • Titan (P-metric tires): typically 35 psi front / 35 psi rear
      • Titan XD (LT Load Range E): commonly 60–65 psi front/rear depending trim/tire; always follow the door placard
    • Bolt pattern: 6x139.7 mm (6x5.5")
    • Wheel size and offset: 18x8J or 20x8J; OEM offset ~ +25 mm (typical range +18 to +30 mm)
    • Load index / speed rating (OE): generally LI 112–117, speed S–T (varies by trim/tire)
    • Spare tire: Full-size steel spare, commonly 265/70R18 (LT265/70R18 E on XD). Some 20" packages use an 18" spare with matching overall diameter
    • TPMS sensor frequency: Usually 433 MHz on 2020–2022 Titans; some markets/parts may use 315 MHz—verify by VIN or sensor PN

    Tire sizes by trim

    Trim (2022)WheelTire size (OE)Notes
    Titan S / SV18x8JP265/70R18All-season highway tread
    Titan PRO-4X18x8JP275/65R18All-terrain pattern from factory
    Titan Platinum Reserve20x8JP275/60R20Touring/all-season
    Titan XD S / SV18x8JLT265/70R18 ELoad Range E, higher placard psi
    Titan XD (optional)20x8JLT275/60R20 ELoad Range E

    Note: Exact tire brand, load index, and speed rating can vary by factory package; consult your door placard and owner’s manual.

    Recommended replacement tires

    • Budget (highway all-season, P-metric):
      • Kumho Crugen HT51 — dependable highway manners and long tread life
      • General Grabber HTS60 — good value, solid wet traction
    • Mid-range (all-season/AT, P-metric or LT where available):
      • Cooper Discoverer AT3 4S (P-metric) — mild all-terrain with strong snow/wet grip
      • Falken WildPeak A/T3W (P-metric or LT E) — excellent off-road bite and winter rating
    • Premium (touring or rugged LT for XD):
      • Michelin Defender LTX M/S (P-metric and LT E) — top-tier comfort, longevity, and towing stability
      • BFGoodrich All-Terrain T/A KO2 (LT E) — proven durability for PRO-4X/XD use
      • Bridgestone Dueler A/T Revo 3 (P-metric and LT) — balanced on/off-road capability

    Choose P-metric tires for standard Titan ride comfort and everyday hauling; select LT Load Range E options for frequent towing/hauling or for Titan XD.

    When to inflate to max load psi (HD trucks only)

    This applies to Titan XD with LT Load Range E tires. The sidewall “max” (often 80 psi) is the tire’s maximum pressure at its rated load—not the normal setting. Use door-placard pressures (commonly 60–65 psi F/R) for typical driving. Consider increasing toward the sidewall max only when:

    • You’re towing or hauling near the GVWR/GAWR listed on the door sticker
    • You need additional rear axle capacity support and the wheels are rated for the higher psi

    Tips:

    • Never exceed the wheel’s maximum psi rating
    • Adjust pressures based on axle load—often the rear needs more psi when towing
    • After the heavy load is removed, return to placard pressures for ride, traction, and wear

    Lug nut torque & pattern

    • Lug pattern: 6 lugs on 139.7 mm circle (6x5.5")
    • Torque: 98 lb-ft (133 N·m) for OEM studs and wheels; re-torque after 50–100 miles following any wheel service
    • Tightening: Use a star pattern across the 6 lugs for even clamping

    Common tire issues for this vehicle

    • Uneven wear if rotations are skipped: The Titan’s torque and weight can feather or cup front tires without 5–7.5k mile rotations
    • Overinflation on XD: Running LT E tires at or near 80 psi when unloaded causes harsh ride, center wear, and reduced wet traction—use the placard
    • PRO-4X cupping/noise: Aggressive AT tread can develop heel-toe wear; keep alignment in spec and rotate on schedule
    • TPMS relearn: After tire rotation or sensor replacement, some Titans require a brief drive cycle to clear TPMS warnings; verify sensor frequency (often 433 MHz)
    • 20" wheel vulnerability: Lower sidewall height on 275/60R20 can increase risk of rim damage on potholes—mind pressures and avoid impacts

    Need new tires? Find a trusted shop on Repairius.

    Need service on your Nissan Titan?

    Request service from shops in your area.

    More specs for the 2022 Nissan Titan

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-10-14.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email