2019 Chevrolet Equinox Paint Codes

Quick Reference

Note: Paint codes can have multiple formats. The three-digit GM code (e.g., GAZ) and the "WA" code (e.g., WA8624) are both valid. Always confirm your specific code before ordering.

Where to Find Your Paint Code

Finding the exact paint code for your 2019 Chevrolet Equinox is a straightforward process. Unlike some manufacturers who place the code on the driver's door jamb, GM vehicles typically have a "Service Parts Identification" sticker.

The most common location for this sticker in an Equinox is inside the glove box, either on the inside of the glove box door or on the side of the compartment itself. If it's not there, check the trunk area near the spare tire or on the B-pillar on the driver's side.

The sticker contains a wealth of information about your vehicle's options and build specifications. You are looking for a line of codes at the bottom. The paint code is usually preceded by "BC/CC," which stands for Basecoat/Clearcoat. Look for a code that matches the format in the table above, such as "WA8624" or "G1E".

If you can't find the sticker or the code is unreadable, your best bet is to call a Chevrolet dealership parts department. Provide them with your Vehicle Identification Number (VIN), and they can look up the exact factory color for your specific vehicle.

Best Touch-Up Paint Sources

Once you've identified your paint code, you have several excellent options for purchasing touch-up paint to fix minor chips and scratches:

• Dupli-Color: Widely available at auto parts stores like AutoZone and Advance Auto Parts, Dupli-Color offers a range of applicators, from simple pens for small nicks to aerosol sprays for larger areas. Their "All-in-1" applicators that include a pen tip, a brush, and clear coat are particularly convenient.
• AutomotiveTouchup: This online retailer is an excellent source for precision-matched paint. They offer paint pens, brush-in bottles, aerosol cans, and even larger quantities for spray guns. Their kits often include primer, sandpaper, and polishing compound, providing everything you need for a professional-looking repair.
• Tcoat Custom-Mix: For a guaranteed match, especially for metallic and pearl finishes, consider a supplier that mixes the paint on demand based on your code. This ensures you get fresh paint that hasn't been sitting on a shelf.
• Chevrolet Dealership: Your local dealer's parts department can sell you Original Equipment Manufacturer (OEM) touch-up paint. This is often the most reliable way to get a perfect match directly from the source, though it may be a bit more expensive.

How to Use Touch-Up Paint

A patient, methodical approach will yield the best results when repairing paint chips:

1. Clean the Area: Thoroughly wash the chip with soap and water, then dry it completely. Use a wax and grease remover or rubbing alcohol on a lint-free cloth to ensure the surface is free of any contaminants.
2. Apply Primer: For deep chips that go down to the bare metal or plastic, applying a thin layer of automotive primer is crucial. This helps the base color adhere properly and prevents rust. Let it dry completely.
3. Apply Base Coat: Shake the paint applicator thoroughly. Apply several very thin coats of your color-matched base coat, allowing each coat to dry for at least 30 minutes. The goal is to build the color up slowly until it's level with the surrounding paint.
4. Apply Clear Coat: After the final base coat has cured (check the paint instructions, but 1-2 hours is typical), apply one or two thin layers of clear coat. The clear coat protects the base color and provides the glossy finish.

Color Matching Tips for Pearls and Tri-Coats

Colors like Cajun Red Tintcoat (G1E) and Iridescent Pearl Tricoat (G1W) are more complex. These are "tri-coat" or three-stage finishes, meaning they have a solid base color, a translucent pearl mid-coat, and a final clear coat. This combination creates a deep, shimmering effect that can be difficult to replicate with a simple touch-up pen.

For these colors, it is highly recommended to purchase a kit that includes both the base color and the pearl mid-coat. The key is to apply the base, let it dry, and then apply the pearl coat. The number of pearl coats applied will affect the final color, so it's essential to use a test card first to practice your application and find the right shade to match your vehicle. Blending the repair into the surrounding area is often necessary for a seamless look.

For anything more than a tiny stone chip on a pearl finish, achieving a perfect repair with DIY methods can be challenging. For larger scratches or damage, professional refinishing is the best option.

Find a trusted body shop on Repairius.