2017 Chevrolet Equinox Paint Color Codes & Touch-Up Guide

Finding the exact paint color for your 2017 Chevrolet Equinox is essential if you need to touch up scratches, replace a mirror cap, or repaint a bumper. General Motors uses specific paint codes that correspond to unique formulas, ensuring a seamless match when you purchase aftermarket or OEM touch-up paint.

Below is your complete guide to the 2017 Chevrolet Equinox factory paint codes, where to locate your vehicle's specific code, and how to achieve the best results when doing minor paint repairs.

Quick reference

Here are the factory colors offered for the 2017 Chevrolet Equinox. GM paint codes typically have a two- or three-digit RPO code (like GAZ) and a longer "WA" code (like WA8624). We have listed both for your convenience.

Color Name	Paint Code (RPO / WA)	Type
Summit White	GAZ / WA8624	Solid
Black	GBA / WA8555	Solid
Silver Ice Metallic	GAN / WA163D	Metallic
Nightfall Gray Metallic	G7Q / WA139X	Metallic
Mosaic Black Metallic	GB8 / WA384A	Metallic
Blue Velvet Metallic	G1M / WA410Y	Metallic
Siren Red Tintcoat	G1E / WA405Y	Tintcoat / Pearl
Patriot Blue Metallic	G1F / WA402Y	Metallic

Note: If you are uncertain about your specific color, confirm it via your VIN at a local Chevrolet dealer or with your chosen paint supplier before ordering.

Where to find your paint code

Locating the paint code on a 2017 Chevrolet Equinox is relatively straightforward. General Motors prints this information on the Service Parts Identification (SPID) label.

1. Check the Glove Box: For the 2017 Equinox, the SPID sticker is typically located inside the glove box. Open the glove box door and look for a silver or white sticker packed with three-character codes.
2. Look for the "BC/CC" or "WA": Scroll to the very bottom of this sticker. You will usually see a code starting with "BC/CC" (Basecoat/Clearcoat) followed by a "U" (Upper body color) and the WA-code (e.g., U 8624 or WA8624).
3. Check the Driver's Door Jamb: If it is not in the glove box, check the driver's side door jamb or the B-pillar on the vehicle certification label, though GM heavily utilized the glove box for this generation.

Best touch-up paint sources

Once you have your exact WA code, it's time to source your paint. Here are the top recommendations for reliable color matching:

• Dealer (OEM Paint): Your local Chevrolet dealership's parts department sells exact-match touch-up paint pens and small brush bottles. This is highly recommended for standard solid and metallic colors.
• AutomotiveTouchup: A fantastic online source that custom mixes paint based on your WA code. They offer everything from paint pens for tiny chips to aerosol spray cans and ready-to-spray pints for larger jobs.
• Dupli-Color: Available at most local auto parts stores (like AutoZone or O'Reilly). They offer the "Perfect Match" line. Just check the back of the can to ensure it lists your specific GM WA code.
• Tcoat Custom-Mix: Great for higher-end, multi-stage repair kits that include specialized primers and clear coats for deep scratches.

How to use touch-up paint

For a professional-looking repair at home, patience is key. Follow these standard steps:

1. Clean: Wash the area thoroughly with soap and water, then wipe it down with a wax and grease remover or rubbing alcohol to remove any contaminants.
2. Prep and Primer: If the scratch goes all the way down to bare metal or plastic, apply a thin layer of automotive primer. Let it dry completely according to the manufacturer's instructions.
3. Base Coat: Apply the color-matched base coat in light, thin layers. Do not try to fill the scratch in one go, as the paint will pool and run. Allow 10–15 minutes of drying time between each coat until the color covers the area evenly.
4. Clear Coat: Once the base coat is dry (usually after 30-60 minutes), apply the clear coat. The clear coat provides the glossy finish and UV protection. Apply it in thin layers, just like the base coat.
5. Polish: After curing for a few days, lightly polish the area with a mild rubbing compound to blend the repair with the surrounding clear coat.

Color matching tips for pearls and tri-coats

Colors like Siren Red Tintcoat require a little extra care. These are often tri-coat paints, meaning they use a solid base color, a translucent pearl or tinted mid-coat, and a final clear coat.

• Practice First: Always test your tri-coat kit on a piece of scrap metal or thick glossy cardboard. The final color changes depending on how many layers of the translucent mid-coat you apply.
• Count Your Coats: Keep track of how many mid-coats it takes to match your Equinox's factory finish on your test card, then replicate that exactly on the vehicle.
• Blending: Metallic and pearl finishes reflect light directionally. When using an aerosol spray, use sweeping motions and blend the paint slightly into the surrounding area to trick the eye.

Taking the time to find the exact code and properly applying the paint will keep your Equinox looking sharp for years to come. If a scratch or dent is too large for a DIY touch-up, leave it to the professionals.

Find a trusted body shop on Repairius.