2024 Chevrolet Equinox Oil Capacity & Filter

The 2024 Chevrolet Equinox takes 5.3 quarts (5.0 liters) of SAE 0W-20 engine oil.

Quick Answer

• Oil Capacity: 5.3 quarts (5.0 liters)
• Recommended Oil Weight: SAE 0W-20
• Oil Specification: Dexos1 Gen3 / API SP
• OEM Oil Filter Part Number (1.5L Turbo): 12696013 (GM Genuine Parts)
• Aftermarket Oil Filter Cross-References (1.5L Turbo):
  • Fram: PH12060
  • Wix: WL10010
  • Mobil 1: M1C-153A

Capacity by Engine Option

Oil Change Interval

Chevrolet recommends changing the engine oil in your 2024 Equinox based on the Oil Life Monitoring System (OLMS), but generally:

• Normal Duty: Typically every 7,500 miles or 12 months, whichever comes first. The OLMS will indicate when an oil change is due.
• Severe Duty: If you frequently drive in conditions such as heavy city traffic, dusty roads, extreme temperatures, or tow heavy loads, the OLMS may recommend an oil change sooner, potentially around 3,000 to 5,000 miles.

Always follow the vehicle's Oil Life Monitoring System and consult your owner's manual for the most accurate information.

Drain Plug Torque

The oil drain plug on the 2024 Chevrolet Equinox (1.5L Turbo engine) should be torqued to 18 lb-ft (25 Nm). It is highly recommended to replace the drain plug gasket or crush washer with a new one during every oil change to prevent leaks. The OEM drain plug gasket is typically a 12mm washer.

How to Change the Oil

Changing the oil on your 2024 Chevrolet Equinox is a straightforward process:

1. Safely lift and support the front of the vehicle using jack stands.
2. Locate the oil drain plug on the bottom of the oil pan.
3. Place a drain pan underneath and remove the drain plug, allowing the old oil to drain completely.
4. Reinstall the drain plug with a new crush washer and torque to specifications.
5. Locate the oil filter, typically on the front of the engine, and remove it using an oil filter wrench.
6. Apply a thin layer of new oil to the gasket of the new oil filter.
7. Install the new oil filter and tighten it by hand until snug, then an additional 3/4 to 1 full turn (or follow filter manufacturer instructions).
8. Lower the vehicle.
9. Remove the oil fill cap and add the recommended amount and type of new engine oil.
10. Reinstall the oil fill cap, start the engine, and check for leaks.
11. After a few minutes, turn off the engine, wait for the oil to settle, and check the oil level on the dipstick, adding more if necessary.
12. Reset the oil life monitoring system.

Common Issues / Tips

• Oil Life Monitoring System (OLMS): Trust the OLMS in your Equinox. It accurately calculates when an oil change is needed based on driving conditions and engine operation. Don't simply rely on mileage intervals alone.
• Correct Oil Specification: The 1.5L turbo engine is sensitive to the correct oil. Always use an oil that meets the Dexos1 Gen3 specification to ensure proper lubrication and longevity of engine components, especially the turbocharger.
• Turbocharger Care: Allow the engine to idle for a minute or two after hard driving before shutting it off. This allows the turbocharger to cool down, preventing oil coking and potential premature wear.
• Check for Leaks: Especially with newer vehicles, it's a good practice to periodically check for any signs of oil leaks around the engine, particularly after an oil change.
• Drain Plug Location: The drain plug for the 1.5L engine is typically on the driver's side of the oil pan.

Need an oil change? Find a trusted shop on Repairius.