2024 Chevrolet Equinox — Paint Color Codes & Touch‑Up Guide

Quick reference

Notes:

• The codes above are GM RPO (Regular Production Option) paint codes commonly used to identify the color. Some paint suppliers may also reference GM “WA” numbers; your supplier can cross‑reference the RPO to the WA code.
• Additional 2024 Equinox colors may include Sterling Gray Metallic, Harvest Bronze Metallic, and select pearl/tri‑coats depending on trim and region. If your color isn’t listed, confirm the exact code by VIN with a Chevrolet dealer or a paint supplier before ordering.

Where to find your paint code

On late‑model Chevrolets, including the 2024 Equinox, you can find the factory paint code in one or more of these spots:

• Driver‑side B‑pillar/door‑jamb certification label: Open the driver’s door and look on the door edge or the B‑pillar. Many 2024 GM models list the exterior color as a three‑character RPO (for example, GAZ, GBA, GJV, GNT). Some labels show “Paint,” “BC/CC,” or similar next to the code.
• Rear cargo area Service Parts Identification (SPID) label: Lift the cargo floor panel; on some Equinox models the SPID sticker (a larger options list) is attached near the spare/inflator compartment. It will include the paint RPO among other option codes.
• If you can’t find a label, your Chevrolet dealer can pull the paint code from the VIN, and most professional paint suppliers can do the same.

Tip: Photograph the entire label so the supplier can see the full RPO list—helpful if your color is a tri‑coat or if there are mid‑year color changes.

Best touch‑up paint sources

• Dupli‑Color: Widely available pen, bottle, and aerosol formats for popular GM codes like GAZ (Summit White) and GBA (Mosaic Black Metallic).
• AutomotiveTouchup: Custom‑mixed OEM‑match paint in pens, bottles, and aerosols, plus compatible primers and clears.
• Tcoat custom‑mix: Jobber‑grade mixing to your exact RPO/WA code; ideal when you need a closer match or larger quantities for spot repairs.
• Chevrolet dealer parts: Genuine touch‑up pens/bottles for the exact RPO; convenient for common colors.

Always verify your RPO/WA code from the vehicle label or VIN before ordering.

How to use touch‑up paint

1. Clean and decontaminate: Wash with car‑safe soap, then wipe the chip/scratch with isopropyl alcohol or wax‑and‑grease remover. Feather any sharp edges with 1500–2000‑grit.
2. Mask and prime (if bare metal/plastic is exposed): Lightly mask around the spot. Apply a thin etch or plastic primer as appropriate. Let it flash fully; sand lightly if needed.
3. Apply basecoat color: Shake the bottle/pen well. Build color in multiple thin passes, allowing proper flash time between coats. Stop when the color is just proud of the surrounding surface.
4. Clearcoat: After base flashes/drys per the product sheet, add clear in light coats to restore gloss and UV protection. Slightly over‑lap onto the surrounding finish.
5. Level and polish (optional): Once cured, flatten high spots with 2000–3000‑grit or micromesh, then refine with compound and polish. Protect with sealant or wax after full cure.

Work in 60–80°F (16–27°C) conditions with low humidity. Follow the manufacturer’s tech sheet for exact flash and cure times.

Color matching tips for pearls and tri‑coats

• Identify the finish type: GM “Tintcoat” colors like Radiant Red Tintcoat (GNT) are tri‑coats—ground color plus a translucent mid‑coat and clear. Pearls/tri‑coats shift with film build; too many or too few passes can change brightness and hue.
• Spray‑out card first: If you’re using aerosol or a touch‑up gun, make a small test panel to compare in daylight before committing to the vehicle.
• Blend edges when possible: Even a perfect formula can read slightly different on aged paint. For panel repairs, extend color and clear into adjacent areas to soften transitions.
• Mind viewing angles and light: Metallics like Mosaic Black (GBA) and Riptide Blue (GJV) can look darker or lighter depending on flake orientation. Check your match outdoors and under neutral light.
• Batch consistency: If buying multiple aerosols or bottles, order together from the same supplier batch to minimize lot‑to‑lot variation.

If your Equinox color isn’t listed above or you’re unsure between similar shades (e.g., Sterling Gray vs. Silver Ice), confirm by VIN with a Chevrolet dealer or a professional paint supplier. They can provide the precise RPO and corresponding WA number for the best match.

Find a trusted body shop on Repairius.