2022 Chevrolet Silverado 1500 Key Fob Programming Guide

Quick reference

Step-by-step on-board programming

Unfortunately, the 2022 Chevrolet Silverado 1500 does not offer a DIY on-board programming procedure for its key fobs. This means you cannot program a new key fob yourself using a series of ignition cycles or button presses.

Programming a new key fob for your 2022 Silverado 1500 requires specialized diagnostic equipment connected to the vehicle's onboard computer (OBD-II port). This equipment is typically found at a Chevrolet dealership or a professional automotive locksmith.

Why is specialized equipment needed? Modern vehicle security systems, like those in the 2022 Silverado, utilize encrypted rolling codes and sophisticated immobilizer technology. This prevents unauthorized key fobs from starting your vehicle and enhances overall security. The programming process involves linking the new key fob's unique identification code to your vehicle's Body Control Module (BCM) and Engine Control Module (ECM).

Battery replacement

To replace the battery in your 2022 Chevrolet Silverado 1500 key fob, follow these steps:

1. Locate the release button: On the side or back of your key fob, you'll find a small release button. Press and hold this button.
2. Remove the emergency key: While holding the release button, pull out the emergency key blade from the top or side of the fob.
3. Separate the fob halves: Using a small, flat-head screwdriver or a coin, gently pry apart the two halves of the key fob. There will be a small notch or seam where you can insert your tool.
4. Remove the old battery: Carefully remove the old CR2032 battery from its compartment. Note its orientation (positive side up or down).
5. Insert the new battery: Place a new CR2032 battery into the compartment, ensuring the positive (+) side faces the same direction as the old battery.
6. Reassemble the fob: Carefully snap the two halves of the key fob back together until they are secure. Reinsert the emergency key blade.

Where to buy a replacement fob

When considering where to purchase a replacement key fob for your 2022 Chevrolet Silverado 1500, you have a few options, each with its own pros and cons:

• Chevrolet Dealership:

  • Pros: Guaranteed genuine OEM part, often comes with programming included in the price. The most straightforward option if you want peace of mind.
  • Cons: Typically the most expensive option. Expect to pay anywhere from $250 to $400+ for the fob and programming.

• Automotive Locksmith:

  • Pros: Often more affordable than a dealership. Many locksmiths offer mobile services, coming to your location. They have the necessary diagnostic tools for programming.
  • Cons: Quality of aftermarket fobs can vary. While most reputable locksmiths use high-quality aftermarket or OEM fobs, it's good to confirm.
  • Cost Expectation: Prices can range from $150 to $300, depending on whether it's an OEM or aftermarket fob and if programming is included.

• Online Retailers (e.g., Amazon, eBay):

  • Pros: Usually the cheapest option for the fob itself. You can find both OEM and aftermarket options.
  • Cons: The fob will still need to be programmed by a locksmith or dealer, adding to the overall cost. There's a risk of purchasing a counterfeit or incompatible fob if not careful with the seller. Does not include key cutting.
  • Cost Expectation: Fobs alone can be $50 to $150, but remember to factor in programming and potentially key cutting costs.

If on-board programming isn't supported

As established, on-board programming is not an option for your 2022 Chevrolet Silverado 1500. This means you will need to rely on a professional for programming.

Cost Expectations:

• Dealer/Locksmith Programming: The cost for programming alone, if you provide your own fob, can range from $80 to $150, though some may charge more if they also have to cut an integrated key blade.

Immobilizer Transponder:

Your 2022 Silverado 1500 key fob contains an immobilizer transponder chip. This chip communicates with your vehicle's immobilizer system, which is a crucial part of the anti-theft security. Even if you manage to cut a new key blade, the vehicle will not start without the transponder chip being correctly programmed to your truck. The programming process for the remote functions and the immobilizer transponder chip are usually done simultaneously by the specialized diagnostic equipment.

Cuts Required?: If your key fob includes an integrated metal key blade (for unlocking the door manually or starting the ignition in an emergency), this blade will need to be cut to match your vehicle's locks. Most dealerships and locksmiths offer this service.

Find a mobile locksmith or shop on Repairius.