2014 Chevrolet Silverado 2500HD Key Fob Programming

Quick reference

Step-by-step on-board programming

Great news! The 2014 Chevrolet Silverado 2500HD supports on-board programming, meaning you can program additional key fobs yourself without a trip to the dealership or a locksmith. You'll need all existing working key fobs and any new key fobs you wish to program for this procedure.

1. Insert the existing, programmed key into the ignition and turn it to the "ON" position (do not start the engine).
2. Turn the key to the "OFF" position, then immediately remove it from the ignition.
3. Within 10 seconds, insert the new, unprogrammed key into the ignition and turn it to the "ON" position (do not start the engine). You should hear a chime, indicating the vehicle is in programming mode.
4. Remove the new key from the ignition.
5. Press and hold the "LOCK" and "UNLOCK" buttons simultaneously on the new key fob for about 15 seconds. You should hear a chime, indicating successful programming.
6. Repeat step 5 for any additional new key fobs you wish to program.
7. To exit programming mode, insert an existing, programmed key into the ignition and turn it to the "ON" position for 10 seconds.

Important Note: The transponder chip for starting the vehicle is programmed separately. While this procedure will program the remote functions (lock, unlock, panic), you will still need a locksmith or dealer to program the transponder chip in an integrated key/fob for the vehicle to start.

Battery replacement

The OEM key fobs for the 2014 Chevrolet Silverado 2500HD use two CR2033 coin cell batteries. Replacing them is a straightforward process:

1. Locate the small notch or slot on the side of the key fob casing.
2. Using a small flat-head screwdriver or a coin, carefully pry open the two halves of the key fob.
3. Gently remove the old batteries, noting their orientation (positive side up).
4. Insert the new CR2033 batteries with the positive side facing up.
5. Carefully snap the two halves of the key fob back together until you hear a click.

Where to buy a replacement fob

When it comes to replacing your key fob, you have a few options, each with its own pros and cons:

• Dealership:
  • Pros: Guaranteed genuine OEM part, often comes with programming included.
  • Cons: Most expensive option. Expect to pay anywhere from $150 to $350 or more for the fob and programming.
• Locksmith:
  • Pros: More affordable than the dealership, often offers mobile services, can cut and program both the remote and transponder chip on-site. Can often provide OEM or quality aftermarket fobs.
  • Cons: Prices can vary. Expect to pay around $100 to $250 for a new fob and programming, depending on the locksmith and whether it's an OEM or aftermarket unit.
• Amazon/Online Retailers:
  • Pros: Cheapest option for the physical fob. You can find compatible fobs for $20-$50.
  • Cons: You're only buying the physical fob. You'll still need to pay for cutting the key blade and programming the transponder chip separately (if it's an integrated key/fob). There's also a risk of purchasing a low-quality or incompatible aftermarket fob. Be sure to verify the FCC ID and part numbers match.

If on-board programming isn't supported (for transponder)

As mentioned, while the remote functions can be programmedDIY, the immobilizer transponder chip, which allows your vehicle to start, requires specialized equipment. This means you'll need a professional in one of the following scenarios:

• No working keys: If you've lost all your keys, you'll need a locksmith or dealership to cut a new key and program the transponder to your vehicle's immobilizer system. This can be more costly due to the additional labor involved in generating a new key from your VIN.
• Integrated key/fob units: The 2014 Chevrolet Silverado 2500HD primarily uses integrated key/fob units. Even if you program the remote functions yourself, the key blade will need to be cut to match your vehicle's ignition, and the transponder chip inside the key will need to be programmed to allow the vehicle to start.

Cost Expectations: For transponder programming and key cutting, expect to pay anywhere from $75 to $150 in addition to the cost of the fob itself, whether you go to a locksmith or a dealership.

Find a mobile locksmith or shop on Repairius.