2022 Chevrolet Tahoe Paint Color Codes & Touch-Up Guide

Keeping your 2022 Chevrolet Tahoe looking flawless means addressing rock chips, scratches, and door dings as soon as they happen. Whether you are dealing with a minor scuff on the bumper or a noticeable scratch down the quarter panel, finding the exact factory paint code is the first step to a seamless repair.

Below is your comprehensive guide to the 2022 Chevrolet Tahoe paint codes, where to locate them, and how to apply touch-up paint correctly.

Quick reference

General Motors typically uses a "WA" code for paint mixing, alongside a three-character RPO (Regular Production Option) code used for ordering. When buying touch-up paint, the WA code is the most precise identifier. Here are the factory colors offered for the 2022 Chevrolet Tahoe:

Color Name	Paint Code (WA / RPO)	Type
Black	WA8555 / GBA	Solid
Summit White	WA8624 / GAZ	Solid
Iridescent Pearl Tricoat	WA121V / G1W	Pearl / Tri-coat
Satin Steel Metallic	WA464C / G9K	Metallic
Midnight Blue Metallic	WA122V / GLU	Metallic
Empire Beige Metallic	WA128V / GJW	Metallic
Dark Ash Metallic	WA144H / G6O	Metallic
Evergreen Gray Metallic	WA137H / G6I	Metallic
Auburn Metallic	WA139H / G6D	Metallic
Cherry Red Tintcoat	WA252F / GSK	Tintcoat / Metallic

Note: If you are uncertain about your specific color, always confirm via your VIN at a local GM dealership or with your trusted paint supplier before ordering.

Where to find your paint code

Locating the paint code on a 2022 Chevrolet Tahoe is slightly different from older GM models. In the past, GM placed the Service Parts Identification (SPID) label inside the glove box. However, for newer models like the 2022 Tahoe, GM has modernized this system.

1. Check the Driver’s Side B-Pillar: Open the driver’s side front door and look at the door jamb (the B-pillar). You will find a black-and-white sticker featuring a QR code, your VIN, and tire pressure information.
2. Scan the QR Code: Scanning the QR code with your smartphone will reveal your vehicle's build data, including the paint code.
3. Look at the Bottom of the Sticker: On many of these labels, the paint code is also printed plainly near the bottom edge. Look for a code starting with "WA" or "U" (meaning Upper body color) followed by the four-digit alphanumeric sequence (e.g., U 8555 for Black).

Best touch-up paint sources

Once you have your code, you need high-quality paint to make the repair invisible. Here are the most reliable sources:

• Dupli-Color: A highly accessible option found at most local auto parts stores. They offer Exact-Match pens and aerosols that are perfect for standard solid colors like Summit White or Black.
• AutomotiveTouchup: Known for precision, they custom-mix paint based on your exact WA code. They offer everything from 1/2 oz bottles with built-in brushes to ready-to-spray pints for larger spray gun repairs.
• Tcoat Custom-Mix: A great online alternative for exact-match OEM custom-mixed paints, especially for metallics and specialized tintcoats.
• Your Local Chevy Dealer: OEM AC Delco touch-up pens are available at the dealership parts counter. These are excellent for tiny rock chips and usually cost around $20-$30.

How to use touch-up paint

Achieving a professional-looking result with touch-up paint requires patience and proper preparation. Follow these steps:

1. Clean: Thoroughly wash the damaged area. Use a prep solvent or rubbing alcohol to remove any residual wax, grease, or dirt.
2. Primer: If the scratch goes down to the bare metal or plastic, apply a light coat of primer. Let it dry completely (usually 20-30 minutes) before moving on.
3. Base Coat: Apply the color coat in thin, light layers. Use a fine-tipped brush or a toothpick for tiny rock chips to avoid creating a "blob" of paint. Allow each layer to dry for 10-15 minutes until the color sits flush with the surrounding paint.
4. Clear Coat: Once the base coat is fully dry to the touch, apply the clear coat. The clear coat protects the paint and provides the glossy finish that matches the rest of your Tahoe.

Color matching tips for pearls and tri-coats

Colors like Iridescent Pearl Tricoat or Cherry Red Tintcoat require a slightly different approach. Tri-coats consist of three layers: a solid base coat, a semi-transparent pearl or tinted mid-coat, and a final clear coat.

When touching up a tri-coat, apply the solid base first. Then, apply the pearl mid-coat very sparingly. The more mid-coat you apply, the darker and more pearlescent the finish will become. It is highly recommended to practice on a piece of scrap metal or cardboard first to gauge how many mid-coat layers are needed to match your factory paint.

For major scratches or extensive panel damage on a tri-coat vehicle, touch-up pens rarely yield perfect results. Professional blending is often required to trick the eye and seamlessly integrate the new paint with the old.

Find a trusted body shop on Repairius.