2023 Ford Escape Oil Capacity & Filter Reference

The 2023 Ford Escape takes between 4.3 and 5.5 quarts of engine oil, depending on the engine. This guide provides a comprehensive overview of oil capacities, recommended oil types, and oil filter specifications for your 2023 Ford Escape.

Quick answer

• Oil capacity:
  • 1.5L EcoBoost (WITHOUT Stop-Start Disable Feature): 4.3 quarts (4.1 liters)
  • 1.5L EcoBoost (WITH Stop-Start Disable Feature): 4.3 quarts (4.1 liters)
  • 2.0L EcoBoost: 5.7 quarts (5.4 liters)
  • 2.5L Hybrid/PHEV: 5.5 quarts (5.2 liters)
• Recommended oil weight: SAE 5W-30 for all engines
• Oil spec: WSS-M2C961-A1 (API SP with Resource Conserving or ILSAC GF-6)
• Oil filter:
  • 1.5L EcoBoost:
    • OEM: Ford FL-910S
    • Fram: PH9100
    • Wix: 57502
    • Mobil 1: M1-102
  • 2.0L EcoBoost:
    • OEM: Ford FL-910S
    • Fram: PH9100
    • Wix: 57502
    • Mobil 1: M1-102
  • 2.5L Hybrid/PHEV:
    • OEM: Ford FL-910S
    • Fram: PH9100
    • Wix: 57502
    • Mobil 1: M1-102

Capacity by engine option

Oil change interval

• Normal Duty: Every 7,500 to 10,000 miles or 1 year, whichever comes first. The intelligent oil-life monitor system should be followed.
• Severe Duty: If you operate your 2023 Ford Escape under severe conditions (e.g., frequent towing, extensive idling, extreme temperatures, dusty conditions), it's recommended to change your oil more frequently, typically every 3,000 to 5,000 miles or 6 months.

Drain plug torque

The oil drain plug torque for all 2023 Ford Escape models is typically 19 lb-ft (25 Nm). Always use a new crush washer with each oil change to ensure a proper seal and prevent leaks. The crush washer is usually integrated with the drain plug or sold separately.

How to change the oil

1. Gather your materials: New oil, oil filter, drain pan, wrench for the drain plug, oil filter wrench, and a new crush washer.
2. Warm up the engine for a few minutes, then turn it off and let it cool slightly.
3. Safely lift and support the front of the vehicle using a jack and jack stands.
4. Locate the oil drain plug on the oil pan, place the drain pan underneath, and carefully remove the plug. Allow all the old oil to drain.
5. Once drained, replace the drain plug with a new crush washer and tighten to the specified torque.
6. Locate the oil filter, place the drain pan underneath (as some oil may spill), and unscrew the old filter.
7. Apply a thin film of new oil to the gasket of the new oil filter. Screw on the new filter by hand until it's snug, then tighten an additional 3/4 to 1 full turn (or as per filter manufacturer's instructions).
8. Lower the vehicle and fill the engine with the recommended amount and type of new oil.
9. Start the engine and let it run for a few minutes. Check for leaks around the drain plug and oil filter.
10. Turn off the engine, let it sit for a few minutes, and then check the oil level on the dipstick. Add more oil if necessary.

Common issues / tips

• Engine Codes: When changing the battery or performing other electrical work, some owners have reported temporary "low oil" warnings or other engine codes. These typically clear themselves after a few drive cycles, but it's always wise to check your oil level. Consult your dealer if codes persist.
• Hybrid Engine Quieter Operation: For Hybrid and PHEV models, the engine will cycle on and off frequently. Always ensure you add oil when the engine is off and has had time to settle.
• Oil Changes for Low-Mileage Drivers: If you drive very few miles, you should still adhere to the annual oil change recommendation, as oil degrades over time even without extensive driving.
• Using the Correct Oil: Using the specified WSS-M2C961-A1 oil is crucial for the longevity of your engine, particularly with turbochargers in EcoBoost models, and to prevent issues like Low-Speed Pre-Ignition (LSPI).

Need an oil change? Find a trusted shop on Repairius.