2022 Ford F-150 Coolant Capacity & Type

The 2022 Ford F-150's cooling system capacity can vary slightly depending on the engine, but it typically holds between 14 to 16 quarts (13.2 to 15.1 liters) of coolant.

Quick Answer

• Total Cooling System Capacity: Approximately 14-16 quarts (13.2-15.1 liters)
• OEM Coolant Spec: Ford Motorcraft Orange Antifreeze/Coolant, P-OAT (Phosphated Organic Acid Technology), Ford Specification WSS-M97B57-A2
• Mix Ratio: 50/50 ready-to-use or 50/50 concentrate mixed with distilled water

Capacity by Engine Option

While specific capacities can vary, here's a general guide for the popular engine options in the 2022 Ford F-150. Always consult your owner's manual for the most accurate information.

Flush Interval

Ford recommends a coolant flush and fill for the 2022 F-150 every 100,000 miles or 6 years, whichever comes first, under normal driving conditions. If your truck is subjected to severe duty conditions, such as frequent towing, off-road driving, or extreme temperatures, it's wise to consider changing your coolant more frequently, potentially every 50,000 to 75,000 miles or 3-4 years.

How to Refill & Bleed

Refilling and bleeding the cooling system on a 2022 Ford F-150 is a crucial step to ensure proper operation and prevent air pockets that can cause overheating. Always allow the engine to cool completely before working on the cooling system.

1. Drain the System: If performing a full flush, open the petcock on the bottom of the radiator and remove the radiator cap. Catch the old coolant in a suitable drain pan. Flush with distilled water until clear, if desired.
2. Close Drain & Refill: Close the radiator drain. Begin refilling the system slowly with the specified Ford Motorcraft Orange coolant (50/50 mix with distilled water if using concentrate) through the coolant reservoir.
3. Engine Start & Heat: With the reservoir cap off, start the engine and set the heater to its highest temperature and fan speed (this opens the heater core valve). Allow the engine to reach operating temperature.
4. Burp the System: As the engine warms, the thermostat will open, and coolant will begin to circulate. Squeeze the upper and lower radiator hoses several times to help dislodge any trapped air bubbles. You may see the coolant level in the reservoir drop as air escapes.
5. Maintain Level: Continuously monitor the coolant level in the reservoir and add more coolant as needed to keep it at the