2021 Ford Transit Paint Codes

A complete guide to all 2021 Ford Transit factory paint colors, codes, and touch-up application tips.

Quick Reference

Where to Find Your Paint Code

For any 2021 Ford Transit, the paint code is located on the driver's side door-jamb sticker, also known as the B-pillar. Open the driver's door and look for a white or silver label. The paint code is typically a two-character code (like Z1 for Oxford White) located next to the "EXT PNT" or "EXT TR" heading on this sticker.

If the sticker is missing or unreadable, your local Ford dealer's parts department can find the paint code using your van’s Vehicle Identification Number (VIN). You can also provide your VIN to most online paint suppliers to ensure an exact match.

Best Touch-up Paint Sources

• Dupli-Color: Widely available at auto parts stores like AutoZone and Advance Auto Parts, Dupli-Color offers a range of popular Ford colors in paint pens, brush-in-bottle applicators, and aerosol cans. Their "Perfect Match" line is a reliable option for common colors like Oxford White.
• AutomotiveTouchup: This online retailer provides professional-grade, custom-mixed paint for every factory color. They offer a full range of products, from small touch-up pens to quart and gallon cans for larger repairs, all guaranteed to match your specific paint code.
• Tcoat Custom-Mix: For a perfect match, especially for metallic and pearl finishes, a local automotive paint supplier can use a spectrometer to analyze your vehicle's paint and create a custom-mixed batch. This is the best option for older vehicles where fading may have occurred.
• Ford Dealer: Your local dealership’s parts department can supply you with official Ford-branded touch-up paint. This is a great way to ensure you are getting the exact formula, although it may be a more expensive option.

How to Use Touch-up Paint

For minor chips and scratches, a successful touch-up job requires patience and the right steps:

1. Clean: Thoroughly wash the area with soap and water, then use a wax and grease remover to ensure the surface is perfectly clean.
2. Primer: If the chip goes down to the bare metal, apply a thin layer of automotive primer. This prevents rust and helps the paint adhere properly. Let it dry completely.
3. Base Coat: Apply several thin layers of your color-matched base coat, allowing each layer to dry for 20–30 minutes. Build up the color until it is even with the surrounding paint.
4. Clear Coat: Apply one or two thin layers of clear coat to protect the base coat and match the factory gloss. Allow it to cure for at least 24 hours before polishing or waxing.

Color Matching Tips for Pearls and Metallics

Metallic and pearl finishes like Ingot Silver (UX) and Blue Jeans (N1) contain small flakes that reflect light. To get a good match, it’s crucial to apply the paint in the same direction and with the same technique. When using an aerosol can, hold it at a consistent distance and apply in light, even strokes. For larger repairs, blending the new paint into the existing panel is often necessary to create a seamless transition that is invisible to the eye.

Find a trusted body shop on Repairius.