2014 Freightliner M2 106 Paint Codes

Quick reference

Where to find your paint code

For most Freightliner M2 106 trucks, your paint code sticker is typically located on the driver's side door jamb. Open the driver's door and look for a label or sticker affixed to the door frame or the B-pillar (the structural post between the front and rear doors). This label will contain various vehicle information, including your VIN and paint code. The paint code is often a four-digit number, sometimes preceded by a letter (like "W" or "F" for white). In some cases, it might be on a sticker inside the glove compartment or under the hood. If you have trouble locating it, your local Freightliner dealer parts department can often provide it with your VIN.

Best touch-up paint sources

When it comes to touching up minor scratches or chips on your 2014 Freightliner M2 106, several reputable sources offer quality products:

• Dupli-Color: A widely available brand that offers touch-up pens, paint bottles with brushes, and aerosol cans. Their products can be found at most automotive parts stores and online retailers. Be sure to check their catalog for your specific Freightliner paint code.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint to match your vehicle's factory color precisely. They offer a comprehensive range of products, including pens, bottles, aerosol cans, and larger quantities for more extensive repairs. Simply provide them with your paint code and they will mix the paint to order.
• Tcoat Custom-Mix: Similar to AutomotiveTouchup, Tcoat offers custom-mixed paint solutions. They are known for their accuracy and can be a good option if you're looking for a very precise color match.
• Dealership: Your local Freightliner dealership can also provide touch-up paint specifically formulated for your truck. While sometimes a bit more expensive, this ensures an exact match from the original manufacturer.

How to use touch-up paint

Achieving a good result with touch-up paint requires a few simple steps:

1. Clean the area: Thoroughly clean the chipped or scratched area with soap and water, then an automotive degreaser to remove any wax, grease, or contaminants.
2. Apply primer (if needed): For deeper chips that go down to the bare metal or plastic, apply a thin layer of automotive primer. Allow it to dry completely according to the product instructions.
3. Apply base coat: Apply several thin coats of your base color paint, allowing each coat to dry for 10-15 minutes before applying the next. Build up the paint gradually until it's level with the surrounding surface. Avoid applying a thick single coat, as this can lead to an uneven finish.
4. Apply clear coat: Once the base coat is dry, apply 2-3 thin coats of clear coat. This protects the paint and adds gloss. Many touch-up kits include a clear coat.
5. Polish (optional): After the clear coat has fully cured (usually 24 hours or more), you can gently polish the area with a fine-grit polishing compound to blend the repair with the surrounding paint.

Color matching tips for pearls and tri-coats

The 2014 Freightliner M2 106 primarily came in solid colors. However, if you're dealing with a metallic, pearl, or tri-coat finish (which are less common on this specific model but good to know for general painting situations), color matching can be more challenging. These multi-stage paints achieve their depth and sparkle through multiple layers. For solid colors, a careful application of touch-up paint as described above will yield excellent results. For more complex finishes, it's crucial to follow the touch-up product's specific instructions precisely. If unsure, or for more significant repairs involving these types of paints, consulting a professional body shop is always recommended.

Find a trusted body shop on Repairius.