2015 Honda Accord Paint Codes

Quick Reference

Where to find your paint code

For most 2015 Honda Accord models, your paint code will be located on a sticker on the driver's side door jamb. This sticker is typically a white or silver label that also contains other vehicle information like the VIN and tire pressure recommendations. Look for a section labeled "COLOR" or "EXT PNT" followed by a short alphanumeric code, usually two characters and then often a "P" for pearl or "M" for metallic.

Occasionally, the sticker might be found on the B-pillar (the post between the front and rear doors). If you can't find it in either of these locations, you may also check under the hood on the radiator support or fender well, though this is less common for Honda. If you still have difficulty, your local Honda dealership parts department can provide the exact code using your VIN.

Best touch-up paint sources

• Dupli-Color: A widely available option at auto parts stores, Dupli-Color offers aerosol cans and paint pens that are good for small chips and scratches. Make sure to get the exact color code for the best match.
• AutomotiveTouchup: This online retailer provides custom-mixed touch-up paint in pens, bottles with brushes, and aerosol cans. They offer a wider range of Honda colors, including pearls and metallics, and are known for their color accuracy. You'll need your exact paint code when ordering.
• Tcoat Custom-Mix: For professional-grade results or hard-to-match colors, Tcoat provides custom-mixed paints. This is often the pricier option but can yield excellent results, especially for larger repairs or less common shades.
• Dealership: Your local Honda dealership parts department can also supply OEM touch-up paint. While sometimes more expensive, it guarantees a direct match as it's the original manufacturer's product.

How to use touch-up paint

1. Clean: Thoroughly clean the area around the scratch or chip with soap and water, then an automotive degreaser. Ensure it's completely dry before proceeding.
2. Primer (if needed): For deep scratches that go down to the bare metal or plastic, apply a thin layer of automotive primer. Allow it to dry completely according to the product instructions.
3. Base Coat: Apply thin, even layers of your touch-up color. For pens or small brushes, dab the paint into the scratch, building up the layers until the paint is level with the surrounding surface. For aerosols, spray from about 6-8 inches away in light passes. Allow each coat to dry before applying the next.
4. Clear Coat: Once the base coat has dried, apply a clear coat. This protects the paint and provides a glossy finish. Build up thin layers, allowing each to dry. This step is crucial for durability and a factory-like appearance.
5. Buffing (optional): After the clear coat has fully cured (often 24-48 hours), you can gently buff the area with a fine-grit polishing compound to blend the repair and remove any minor imperfections.

Color matching tips for pearls and tri-coats

Pearl and tri-coat paints, like many offered on the 2015 Honda Accord, have a complex finish due to multiple layers of paint and reflective particles. This makes precise color matching crucial:

• Multiple Layers: Pearl colors often consist of a ground coat, a pearl mid-coat (which provides the iridescent effect), and a clear coat. For tri-coats, this involves three distinct paint layers before the clear coat.
• Application Technique: The way these layers are applied, including the number of coats and how thick they are, significantly impacts the final look. When using touch-up paint, attempt to replicate the original layering as closely as possible, applying very thin, even coats.
• Test Before Applying: Always test your touch-up paint on an inconspicuous area or a test card first. This allows you to see how the color dries and if it matches. For pearl colors, check the match in different lighting conditions.
• Blended Repairs: For larger repairs, professional body shops often "blend" the paint into the surrounding panel rather than just spot-touching the damaged area. This helps to hide any subtle variations in color or pearl effect.
• Verify Code: Due to the complexity, it is even more critical to confirm your exact paint code, ideally by VIN comparison with a dealer or specialized paint supplier. Slight variations in paint codes can result in noticeable differences in pearl effects.

Find a trusted body shop on Repairius.