2024 Honda Accord Oil Capacity, Weight, and Filter Specs

The 2024 Honda Accord requires 3.7 US quarts (3.5 L) of 0W-20 oil for the 1.5L turbocharged engine, or 4.0 US quarts (3.8 L) for the 2.0L hybrid powertrain, both including a filter change. As an ASE-certified master technician, I always emphasize that using the correct oil viscosity, capacity, and filter is critical to keeping your 11th-generation Accord running smoothly for years to come.

Quick Answer

• Oil Capacity: 3.7 quarts (1.5L Turbo) / 4.0 quarts (2.0L Hybrid) with filter.
• Recommended Oil Weight: 0W-20.
• Oil Specification: API SP / ILSAC GF-6A or Genuine Honda Motor Oil.
• OEM Oil Filter: Honda 15400-PLM-A02 (or 15400-PLM-A01).
• Popular Aftermarket Filters: Fram XG7317, Mobil 1 M1-110A, Wix 51356.

Capacity by Engine Option

The 2024 Honda Accord is available with two different powertrains. Ensure you know which engine you have before purchasing your oil, as the capacities differ slightly.

Note: Always check the dipstick after refilling and running the engine to ensure the oil level is at the upper mark.

Oil Change Interval

Honda utilizes the Maintenance Minder system on the dash, which calculates oil life based on your driving habits, temperature, and engine loads. When the gauge reaches 15%, a wrench icon will illuminate. However, standard guidelines are:

• Normal Duty: Follow the Maintenance Minder, which typically recommends a change every 7,500 to 10,000 miles, or every 12 months—whichever comes first.
• Severe Duty: If you frequently drive in stop-and-go traffic, extreme hot/cold temperatures, or make short trips under 5 miles, plan to change your oil every 5,000 miles or 6 months.

Drain Plug Torque

• Torque Spec: 30 lbf-ft (40 N-m).
• Crush Washer: You must replace the 14mm aluminum crush washer (Honda Part # 94109-14000) every time you remove the drain plug to prevent leaks. Do not over-torque the plug, as the aluminum oil pan threads can strip easily.

How to Change the Oil

1. Prepare the Vehicle: Park on a level surface, engage the parking brake, and raise the front of the vehicle safely using a jack and jack stands (or ramps).
2. Remove the Splash Shield: Remove the metal/plastic underbody splash shield using a Phillips screwdriver and a flathead to pop the plastic retaining clips.
3. Drain the Oil: Position your drain pan. Remove the 17mm drain plug and let the old oil drain completely.
4. Replace the Filter: Use an oil filter wrench to remove the old filter. Lubricate the rubber gasket of the new filter with clean oil, and install it hand-tight (about 3/4 to 1 full turn after the gasket makes contact).
5. Reinstall Drain Plug: Install the drain plug with a new 14mm crush washer and torque to 30 lbf-ft. Reattach the splash shield.
6. Refill and Check: Pour in the required amount of 0W-20 oil. Start the engine, let it run for a minute to fill the filter, and check for leaks. Turn off the engine, wait 3 minutes, and verify the oil level on the dipstick.
7. Reset Maintenance Minder: Navigate through your instrument cluster menu to the Maintenance screen, select the oil life item, and hold the dial/button until it resets to 100%.

Common Issues / Tips

• Fuel Dilution (1.5L Turbo): The 1.5L EarthDreams turbo engine can occasionally experience minor fuel dilution (gas mixing with oil), especially if you take many short trips in cold weather where the engine never fully warms up. Changing your oil closer to the 5,000-mile severe duty interval can help mitigate wear from this issue.
• Splash Shield Fasteners: The aluminum fasteners holding the splash shield can seize if you live in the rust belt. A dab of anti-seize on the threads during reassembly will save you a headache next time.
• Hybrid Oil Checks: On the 2.0L Hybrid, the engine may not run constantly while idling. You may need to put the car in "Maintenance Mode" to force the gasoline engine to run for leak checks. Consult your owner's manual or local dealer for the exact pedal-dance procedure.

Need an oil change? Find a trusted shop on Repairius.