2019 Honda Civic Wheel Alignment Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Honda Civic? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Angle | Front Pref | Front Range | Rear Pref | Rear Range |
|---|---|---|---|---|
| Camber | 0.0° | -0.5° to 0.5° | -1.0° | -1.5° to -0.5° |
| Caster | 4.2° | 3.7° to 4.7° | N/A | N/A |
| Total Toe | 0.0° | -0.04° to 0.04° | 0.08° | 0.04° to 0.12° |
| Individual Toe | 0.0° | -0.02° to 0.02° | 0.04° | 0.02° to 0.06° |
| SAI | 13.5° | 13.0° to 14.0° | N/A | N/A |
| Thrust Angle | 0.0° | -0.05° to 0.05° | N/A | N/A |
Adjustability
On a 2019 Honda Civic, only front and rear individual toe are adjustable from the factory. Front toe is adjusted via the inner tie rods, while rear toe is adjusted with an eccentric cam on the rear lower control arm. Front and rear camber and front caster are not factory-adjustable. If these angles are out of spec, it usually indicates that a component is bent or worn out and needs to be replaced. However, aftermarket solutions are available to add adjustability.
Recommended adjustment hardware
For the front, aftermarket lower ball joints with built-in adjustability can be used to correct camber and caster. Alternatively, eccentric "crash" bolts can be installed in the lower strut mount to allow for a small amount of camber adjustment. For the rear, adjustable upper control arms are the most common solution for correcting camber.
Symptoms of bad alignment
A vehicle with bad alignment can exhibit several symptoms. The most common is a pull to one side while driving. A crooked steering wheel is another tell-tale sign. Uneven tire wear is also a major indicator.
- Feathering: This is a pattern of alternating high and low tread blocks across the tire. It's often caused by incorrect toe settings.
- One-sided wear: If the inside or outside of the tire is wearing more quickly than the rest of the tread, this is a classic sign of a camber issue.
- Cupping: This scalloped wear pattern is often a sign of a worn-out suspension component, but it can also be caused by a severe alignment issue.
When to align
You should have your vehicle's alignment checked whenever you install new tires. It's also a good idea to have it checked after any suspension or steering work, such as replacing struts, control arms, or tie rods. Hitting a curb or a large pothole can also throw your alignment out of spec, so it's a good idea to have it checked after an impact like that.
Typical alignment cost
A four-wheel alignment for a 2019 Honda Civic typically costs between $80 and $120, depending on the shop and location. This includes a printout of the before and after alignment specs. If any aftermarket adjustable components need to be installed, that will add to the cost.
Find a trusted alignment shop on Repairius.
More specs for the 2019 Honda Civic
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Honda Civic Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.