2022 Honda Odyssey Oil Capacity & Filter Specs

The 2022 Honda Odyssey takes 5.7 quarts (5.4 liters) of 0W-20 engine oil.

Quick Answer

• Oil Capacity: 5.7 quarts (5.4 Liters) with filter change
• Recommended Oil Weight: 0W-20
• Oil Type Specification: API Premium Grade Drained and Refilled Engine Oil, or an equivalent API Certification Seal oil. Look for the API "starburst" symbol on the oil container.
• Oil Filter:
  • OEM Part Number: 15400-PLM-A02 (consult dealer for latest revision)
  • Fram Cross-Reference: PH7317
  • Wix Cross-Reference: 51356
  • Mobil 1 Cross-Reference: M1-110

Capacity by Engine Option

All 2022 Honda Odyssey models come equipped with a single-engine option:

Oil Change Interval

Honda's Maintenance Minder System will indicate when an oil change is due. This system calculates oil life based on driving conditions, temperature, and engine revolutions. Generally, you can expect intervals to be around:

• Normal Duty: 7,500 - 10,000 miles or 12 months, whichever comes first.
• Severe Duty: 3,000 - 5,000 miles or 6 months, whichever comes first. This applies to vehicles frequently driven in extreme temperatures, dusty conditions, heavy city traffic, or used for towing.

Always refer to your vehicle's owner's manual and the Maintenance Minder system for the most accurate oil change schedule for your driving habits.

Drain Plug Torque

The oil drain plug for the 2022 Honda Odyssey should be torqued to 29 lb-ft (39 N·m). Always use a new crush washer when performing an oil change to ensure a proper seal and prevent leaks. The OEM crush washer part number is typically 94109-14000, but confirm with your dealer.

How to Change the Oil

Changing the oil on your 2022 Honda Odyssey is a straightforward process for the DIY enthusiast:

1. Warm up the engine: Drive the vehicle for a few minutes to bring the oil up to operating temperature, ensuring it drains more easily.
2. Park and secure: Park on a level surface, engage the parking brake, and place wheel chocks behind the rear wheels.
3. Lift and support: Safely lift the front of the vehicle using a jack and support it with jack stands.
4. Locate components: Identify the oil drain plug on the oil pan and the oil filter. The oil filter is usually located on the front of the engine, accessible from below.
5. Drain oil: Place a suitable drain pan beneath the drain plug. Loosen and remove the drain plug, allowing the old oil to drain completely. Inspect the old crush washer and replace it with a new one.
6. Replace filter: Once the oil has drained, remove the old oil filter. Apply a thin coat of new oil to the rubber gasket of the new filter before screwing it on by hand until snug. Do not overtighten.
7. Reinstall drain plug: Clean the area around the drain plug. Reinstall the drain plug with the new crush washer and torque it to 29 lb-ft (39 N·m).
8. Refill oil: Lower the vehicle. Locate the oil fill cap on the engine. Slowly add 5.7 quarts of 0W-20 engine oil.
9. Check level: Start the engine and let it run for a few minutes. Turn it off and wait a few minutes for the oil to settle. Check the oil level using the dipstick and add more if necessary to reach the "full" mark.
10. Reset Maintenance Minder: Follow the instructions in your owner's manual to reset the oil life indicator.
11. Dispose of old oil: Properly dispose of the used oil at an authorized recycling center.

Common Issues / Tips

• Maintenance Minder System: Pay close attention to the Maintenance Minder system on your Odyssey. It