2024 Honda Pilot Oil Capacity & Filter

The 2024 Honda Pilot takes 5.7 quarts (5.4 liters) of 0W-20 engine oil.

Quick Answer

• Oil Capacity: 5.7 quarts (5.4 liters)
• Recommended Oil Weight: 0W-20
• Oil Specification: API SP or a premium-grade 0W-20 detergent oil displaying the API Certification Seal.
• Oil Filter (OEM): 15400-PLM-A02 or 15400-PLM-A01
• Oil Filter (Aftermarket Cross-Reference):
  • Fram: PH7317
  • Wix: 51356
  • Mobil 1: M1-110

Capacity by Engine Option

The 2024 Honda Pilot is equipped with a single engine option across all trims:

Oil Change Interval

Honda recommends adhering to the Maintenance Minder system for determining oil change intervals. This system calculates the remaining oil life based on your driving conditions and habits.

• Normal Duty: Typically, the Maintenance Minder will indicate an oil change is due between 7,500 and 10,000 miles, or annually, whichever comes first.
• Severe Duty: If you frequently drive in demanding conditions such as extreme temperatures, stop-and-go traffic, towing, or dusty environments, the Maintenance Minder may recommend more frequent oil changes, potentially as low as 3,000 to 5,000 miles.

Always monitor your Maintenance Minder system and consult your owner's manual for the most accurate and personalized service schedule.

Drain Plug Torque

The oil drain plug on the 2024 Honda Pilot should be torqued to 29 lb-ft (39 Nm). It is highly recommended to replace the crush washer with a new one every time you perform an oil change to ensure a proper seal and prevent leaks. The OEM crush washer part number is 94109-14000.

How to Change the Oil

1. Warm up the engine to operating temperature, then shut it off.
2. Safely lift and support the front of the vehicle using jack stands.
3. Locate the oil drain plug on the oil pan. Place a drain pan underneath.
4. Remove the drain plug with a wrench (typically a 17mm or 19mm socket, consult your manual if unsure) and allow all the old oil to drain completely.
5. Replace the crush washer on the drain plug and reinsert the drain plug. Torque to 29 lb-ft (39 Nm).
6. Locate and remove the oil filter using an appropriate oil filter wrench.
7. Apply a thin coat of new oil to the rubber gasket of the new oil filter.
8. Screw on the new oil filter by hand until snug, then tighten an additional 3/4 to 1 turn, or according to filter manufacturer specifications.
9. Lower the vehicle.
10. Remove the oil filler cap on the engine.
11. Pour in approximately 5.5 quarts of new 0W-20 oil.
12. Reinsert the oil filler cap.
13. Start the engine and let it run for a few minutes to circulate the new oil. Check for any leaks.
14. Turn off the engine, wait a few minutes for the oil to settle, then check the oil level on the dipstick. Add more oil if necessary until it reaches the full mark.
15. Reset the Maintenance Minder system according to your owner's manual.

Common Issues / Tips

• VCM (Variable Cylinder Management): The 3.5L V6 engine in the Pilot utilizes Honda's Variable Cylinder Management. Maintaining proper oil levels and using the correct oil specification is crucial for the longevity and reliable operation of this system.
• Oil Filter Location: The oil filter on the 2024 Pilot's 3.5L V6 engine is generally accessible from beneath the vehicle, making DIY oil changes relatively straightforward.
• Resetting Maintenance Minder: After every oil change, it's essential to reset the Maintenance Minder system through the infotainment display or instrument cluster. Failure to do so will result in inaccurate service reminders.
• Genuine Honda Parts: While aftermarket filters are available and often high-quality, many Honda owners prefer to use genuine Honda oil filters (Part No. 15400-PLM-A02 or 15400-PLM-A01) for peace of mind and optimal performance.

Need an oil change? Find a trusted shop on Repairius.