2025 International LT Paint Codes

Quick reference

Where to find your paint code

For the International LT, the paint code is typically located on the driver's side door jamb. Look for a sticker or plate that contains vehicle information, including a section labeled "EXT PNT" or "Paint Code." This code will correspond to one of the colors listed above.

Best touch-up paint sources

When it comes to touching up paint on your International LT, several reliable sources can help you achieve a good match:

• Dupli-Color: A widely available brand offering a variety of colors in pens, bottles, and spray cans. They are a good option for minor chips and scratches.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint that is formulated to precisely match your vehicle's factory color. They offer a comprehensive range of products, including primer, base coat, and clear coat, which are essential for achieving professional results, especially with metallic or pearl finishes.
• Tcoat custom-mix: Similar to AutomotiveTouchup, Tcoat provides custom-mixed paints based on your vehicle's specific paint code. This can be a great option for hard-to-match colors or for larger repairs.
• Dealer: Your International dealer can provide genuine touch-up paint specifically designed for your truck. While often more expensive, it guarantees the most accurate match.

How to use touch-up paint

For best results when using touch-up paint, follow these general steps:

1. Clean: Thoroughly clean the area to be repaired with soap and water, then degrease it with a wax and grease remover.
2. Prime (if necessary): For deep scratches or bare metal, apply a thin layer of primer. Allow it to dry completely.
3. Base Coat: Apply thin, even coats of the base color, allowing each coat to dry before applying the next. Build up the color gradually until it matches the surrounding paint.
4. Clear Coat: Once the base coat is dry, apply several thin layers of clear coat to protect the paint and provide a glossy finish. This is crucial for durability and a seamless look.

Color matching tips for pearls and tri-coats

Many modern truck colors, including some offered on the International LT, are metallic or, less commonly, pearl/tri-coat. These finishes can be more challenging to match perfectly due to the way light reflects off the metallic flakes or pearl pigments. Here are some tips:

• Layering is key: For metallic and pearl colors, applying thin, even layers is critical. Building up the color gradually allows the metallic flakes or pearl pigments to lay down correctly, ensuring a consistent appearance.
• Blend: When applying the base coat, especially on metallic colors, try to "blend" the new paint into the surrounding factory paint. This can help minimize visible edges.
• Lighting: Always check your work in various lighting conditions (natural light, shade) to ensure the color match is accurate. Colors can appear differently under different light sources.
• Test panel: If you have extra paint, consider testing it on a discreet area or a test panel first to get a feel for how the color applies and dries.

Never hesitate to confirm your paint code with your VIN at an International dealer or a reputable automotive paint supplier. This small step can save you a lot of time and frustration.

Find a trusted body shop on Repairius.