2022 International MV Series — Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2022 International MV? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 450-500 ft-lb / 610-678 Nm | Refer to specific wheel and hub manufacturer guidelines. Always re-check after initial driving. |
| Oil Drain Plug | 30-40 ft-lb / 41-54 Nm | Use a new crush washer if applicable. |
| Transmission Drain Plug | 30-45 ft-lb / 41-61 Nm | Refer to specific transmission model (e.g., Allison, Eaton). |
| Front Brake Caliper Bracket Bolts | 300-350 ft-lb / 407-475 Nm | |
| Front Brake Caliper Slide Pins | 25-35 ft-lb / 34-47 Nm | Apply appropriate grease to slide pins. |
| Rear Brake Caliper Bracket Bolts | 300-350 ft-lb / 407-475 Nm | |
| Rear Brake Caliper Slide Pins | 25-35 ft-lb / 34-47 Nm | Apply appropriate grease to slide pins. |
| Axle Nut (Front) | 450-550 ft-lb / 610-746 Nm | Consult service manual for specific pre-load and tightening procedures. |
| Axle Nut (Rear) | 450-550 ft-lb / 610-746 Nm | Consult service manual for specific pre-load and tightening procedures. |
| Glow Plugs (Diesel) | 10-15 ft-lb / 14-20 Nm | Ensure engine is cool. Check International service manual for specific engine. |
| Valve Cover Bolts | 10-15 ft-lb / 14-20 Nm | Tighten in a manufacturer-specified sequence. |
| Intake Manifold Bolts | 15-20 ft-lb / 20-27 Nm | Tighten in a manufacturer-specified sequence. |
Properly torquing fasteners is crucial for the safe and reliable operation of any vehicle, especially a heavy-duty truck like the 2022 International MV Series. This guide provides essential torque specifications for common components, helping you maintain your truck to factory standards.
Wheel Lug Torque Pattern
For the 2022 International MV Series, the wheel lug nut torque pattern is generally a star or cross pattern. This ensures even clamping force across the wheel hub, preventing distortion and loosening. Always tighten the lug nuts in several stages to the final specified torque.
Brake Torque Notes
When working on the brake system of your International MV, precision is paramount. Brake caliper bracket bolts are high-torque fasteners that secure the caliper to the steering knuckle or axle housing. It's imperative that these bolts are torqued correctly to prevent catastrophic failure. Brake caliper slide pins, on the other hand, require a much lower torque and typically necessitate the application of specialized grease to allow the caliper to float freely and ensure even pad wear. Always inspect brake components for wear and damage during any service.
Why Torque Matters
Torque is a rotational force that causes an object to rotate around an axis. In automotive applications, applying the correct torque to fasteners is vital for several reasons:
- Safety: Under-torqued fasteners can loosen over time, leading to critical component failure, such as a wheel detaching or brake components failing. Over-torqued fasteners can stretch, weaken, or even break, leading to similar dangerous situations.
- Reliability: Correct torque ensures components are held together with the appropriate clamping force, preventing vibrations, leaks, and premature wear.
- Component Longevity: Fasteners torqued to specification are less likely to fatigue or fail, extending the lifespan of both the fasteners and the components they secure.
- Preventing Damage: Incorrect torque can strip threads, crack housings, or distort mating surfaces, leading to costly repairs.
Always use a calibrated torque wrench and follow the manufacturer's recommended procedures. For critical fasteners, consider using new bolts or nuts as specified by International.
Disclaimer: The information provided on this page is for general reference only. While we strive for accuracy, specific torque values can vary based on sub-model, engine type, transmission, specific component manufacturers, and any aftermarket modifications. Always consult the official International MV Series OEM service manual for the most accurate and up-to-date torque specifications and procedures for your specific vehicle.
Find a trusted shop on Repairius.
More specs for the 2022 International MV
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2022 International MV Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.