2022 Isuzu NQR Tire Size, Pressure, and Wheel Specs

Quick answer

• OEM Tire Size: 215/75R17.5
• Recommended Cold Tire Pressure (Front/Rear): 87 PSI (all tires) - Always refer to your specific vehicle's door placard.
• Bolt Pattern: 6 x 222.25 mm (6 x 8.75 inches)
• Wheel Size: 17.5 x 6.00 inches
• Load Index/Speed Rating: 126/124L
• Spare Tire Size: 215/75R17.5 (Full-size)
• TPMS Frequency: Not applicable (Heavy-duty trucks commonly use tire pressure monitoring systems that are part of a fleet management system, not standard passenger vehicle TPMS frequencies.)

Tire sizes by trim

The 2022 Isuzu NQR is typically offered with a single standard tire size across all its configurations, as it's a commercial cab-over chassis. This simplifies tire selection considerably.

Trim/Configuration	Tire Size
All	215/75R17.5

Recommended replacement tires

When replacing tires on your Isuzu NQR, consider commercial-grade, all-position or drive axle tires designed for medium-duty trucks. Longevity, fuel efficiency, and load-carrying capacity are key factors.

• Michelin X Multi D (Drive Axle): A premium option known for excellent traction and long tread life. These are an investment but deliver superior performance and durability.
  • Price Tier: $$$$
• Goodyear Fuel Max RSA (All-Position Steer): Offers a good balance of fuel efficiency, traction, and durability for both steer and drive applications. A solid all-around performer.
  • Price Tier: $$$
• Sumitomo ST719 (All-Position): A more budget-friendly but reliable option that provides good mileage and resistance to irregular wear for regional and urban applications.
  • Price Tier: $$

When to inflate to max load PSI

For heavy-duty trucks like the Isuzu NQR, maintaining correct tire pressure is critical for safety, handling, tire longevity, and fuel economy. The recommended cold tire pressure of 87 PSI is designed to safely carry the vehicle's Gross Vehicle Weight Rating (GVWR) under most normal operating conditions.

You should inflate your tires to the maximum load PSI (which for the NQR's standard tires is typically around 110-120 PSI, consult the tire's sidewall for exact max PSI) only when your vehicle is consistently operating at or near its maximum permissible load.

Over-inflation for lighter loads can lead to a harsher ride, premature tire wear in the center of the tread, and reduced traction. Conversely, under-inflation, especially when heavily loaded, can cause excessive heat buildup, leading to tire failure, reduced fuel economy, and poor handling. Always cross-reference the vehicle's door placard and the maximum cold inflation pressure listed on the tire's sidewall.

Lug nut torque & pattern

Proper lug nut torque is vital to ensure that the wheels are securely fastened and to prevent issues like wheel detachment or brake rotor warping. For the 2022 Isuzu NQR, the recommended lug nut torque is typically approx. 188-200 lb-ft (255-271 Nm) using a six-lug pattern.

Always use a torque wrench to achieve the exact specification. Re-check torque settings after the first 50-100 miles of a new wheel installation or tire rotation, and periodically thereafter.

Lug Nut Tightening Pattern (6-lug)

Tighten lug nuts in a star pattern to ensure even pressure and proper wheel seating.

1. Start with any lug nut.
2. Skip two lug nuts and tighten the next one.
3. Continue this pattern until all six lug nuts are snug.
4. Repeat the pattern to achieve the specified torque, going in stages (e.g., first pass to half torque, final pass to full torque).

Common tire issues for this vehicle

Isuzu NQR owners, like most commercial vehicle operators, can experience specific tire issues if proper maintenance is overlooked:

• Uneven Wear: Often due to improper tire pressure (under or over-inflation), misaligned suspension, or unbalanced wheels. Steer tires can feather or cup, while drive tires may wear unevenly across the tread.
• Rapid Wear: Can be caused by aggressive driving, consistent overloading, or using tires not suited for the application (e.g., passenger car tires on a commercial vehicle).
• Tire Damage: Punctures, sidewall cuts, and impact damage are common, especially in urban environments or construction sites. Regular inspections are crucial.
• Heat Buildup: Primarily caused by underinflation and/or overloading, leading to premature tire failure. This is a significant safety concern for commercial vehicles.
• Stone Retention: The aggressive treads of some commercial tires can pick up and retain stones, which can then be ejected at high speeds, posing a hazard to other vehicles.

Regular pre-trip inspections, adherence to recommended tire pressures, proper wheel alignment, and balancing are key to mitigating these issues.

Need new tires? Find a trusted shop on Repairius.