2020 Jeep Cherokee Paint Codes

Quick Reference

Where to find your paint code

For most 2020 Jeep Cherokees, you'll find the paint code located on a sticker on the driver's side door jamb. This sticker typically contains a lot of vehicle information, including tire pressure recommendations and the VIN. Look for a section that lists "Paint" or "EXT PNT" followed by a three-character code (sometimes with an additional letter or number).

If you have trouble locating it there, occasionally it can also be found in the glove compartment or owner's manual. If all else fails, a Jeep dealership can provide your paint code to you using your VIN.

Best touch-up paint sources

When it comes to touching up minor scratches or chips on your 2020 Jeep Cherokee, several reputable sources offer quality products:

• Dupli-Color: A widely available option at most automotive parts stores. Dupli-Color offers aerosol cans and paint pens for various Jeep colors, making it a convenient choice for small repairs.
• AutomotiveTouchup: This online retailer specializes in custom-mixed touch-up paint that matches your vehicle's factory color. They offer a wider range of application methods, including paint pens, brush bottles, and aerosol cans, and are known for their accurate color matching.
• Tcoat Custom-Mix: For a truly precise match, especially with more complex colors, a custom-mix service like Tcoat can be an excellent option. They can often precisely match even subtle variations.
• Dealership: Your local Jeep dealership can also provide official touch-up paint, ensuring the exact factory formulation. This is often the most expensive option but guarantees authenticity.

How to use touch-up paint

Achieving a good result with touch-up paint requires a few careful steps:

1. Clean the area: Before applying any paint, thoroughly clean the damaged area with soap and water, then wipe it down with a wax and grease remover. This ensures proper adhesion.
2. Apply primer (if necessary): For deeper scratches or chips that expose bare metal, apply a thin layer of primer. Allow it to dry completely according to the product instructions.
3. Apply base coat: Shake your touch-up paint thoroughly. Apply thin, even coats, allowing each coat to dry for the recommended time before applying the next. Build up the color slowly until it matches the surrounding paint.
4. Apply clear coat: Once the base coat is dry, apply a clear coat to protect the paint and provide a glossy finish. This step is crucial for durability and a professional look.

Color matching tips for pearls and tri-coats

Colors like Diamond Black Crystal Pearl, Hydro Blue Pearl, and Velvet Red Pearl are multi-stage paints. They contain pearl flakes that create a shimmering effect. When touching up these colors, it's even more critical to apply thin, even coats and build up the color slowly. The clear coat is especially important for bringing out the pearl effect.

For tri-coat paints (which typically have a base coat, a mid-coat for color and pearl effect, and then a clear coat), achieving a perfect match can be challenging for DIYers. If you have a tri-coat color and the damage is significant, consider professional repair for the best results. Always confirm your exact paint code with a dealer or paint supplier using your VIN to ensure you get the correct paint for these complex finishes.

Find a trusted body shop on Repairius.