2022 Jeep Cherokee Bulb Size Guide

Quick Reference

The 2022 Jeep Cherokee comes with a variety of lighting configurations depending on the trim level and optional packages. It's crucial to note that some higher trim levels (such as the Limited, Trailhawk, and Summit) may come equipped with factory LED headlights, fog lights, and tail lights, while lower trims typically feature halogen bulbs. Always double-check your specific vehicle's configuration before purchasing replacement bulbs.

LED vs Halogen Upgrade Considerations

Upgrading your 2022 Jeep Cherokee's halogen bulbs to LEDs can offer numerous benefits, including brighter illumination, a longer lifespan, and a more modern appearance. However, there are several factors to consider before making the switch:

• CANBUS Errors: Modern vehicles like the 2022 Jeep Cherokee utilize a Controller Area Network Bus (CANBUS) system to monitor various electrical components, including lighting. When you replace a halogen bulb with an LED, the LED's lower power draw can sometimes trigger a "bulb out" warning or hyper-flashing (for turn signals) on your dashboard. To prevent this, you may need to install CANBUS-compatible LED bulbs or add load resistors.
• Adapters and Decoders: Some aftermarket LED bulbs may require specific adapters or decoders to ensure proper fitment and function. These components help resolve flickering issues, retain high beam functionality, and prevent error codes.
• Beam Pattern: Not all LED bulbs are created equal. Poorly designed LED replacement bulbs can create an unfocused beam pattern in halogen reflector housings, leading to glare for oncoming drivers and reduced visibility for you. Look for LED bulbs designed to mimic the filament placement of their halogen counterparts for optimal beam patterns.
• Heat Dissipation: LED bulbs generate heat, and effective heat dissipation is crucial for their longevity. Many LED bulbs incorporate heatsinks and cooling fans. Ensure there's adequate space in your Cherokee's headlight housing for any larger LED bulbs and their cooling mechanisms.

How to Replace Each Bulb

• Low Beam/High Beam Headlights: Access to the headlight bulbs typically involves removing a few clips or screws to pull back the fender liner or reaching through the engine bay. Twist the bulb counter-clockwise to remove. For some trims, the headlights are an integrated LED unit, and replacement would require a full assembly.
• Fog Lights: These are usually accessible from underneath the front bumper or by removing the fender liner. Twist the bulb out of its housing.
• Daytime Running Lights (DRL): Often integrated into the headlight assembly or a separate LED strip. If it's a replaceable bulb, it's typically a simple twist-and-pull.
• Front Turn Signals: Access is usually gained by reaching behind the headlight assembly or removing some fender liner fasteners. Twist the socket and pull the bulb straight out.
• Rear Turn Signals/Brake Lights/Reverse Lights/Tail Lights: Access to these bulbs involves opening the liftgate and removing a few screws or clips that hold the tail light assembly in place. Once the assembly is out, twist the bulb sockets to remove the bulbs.
• License Plate Lights: These are typically accessed by removing small screws holding the clear lens cover in the liftgate trim above the license plate.
• Side Markers (Front/Rear): Usually a simple twist-and-pull after gaining access to the housing, often through the fender liner or by carefully prying the lens.
• Dome/Map Lights: Carefully pry off the lens cover using a plastic trim tool. The bulbs usually pull straight out or twist out of their sockets.

Common Lighting Issues for this Generation

The 2014-2023 Jeep Cherokee generation can experience a few common lighting-related issues:

• Premature Halogen Bulb Failure: Some owners report shorter lifespans for factory halogen bulbs, particularly headlights. This can be exacerbated by vibrations or frequent exposure to moisture.
• DRL Malfunctions (LED): While less common, some factory LED DRLs on higher trims might experience flickering or partial failure over time, often requiring replacement of the entire headlight assembly.
• Tail Light Condensation: Moisture can sometimes accumulate inside the tail light assemblies, leading to condensation. While not always affecting bulb function, it can be an aesthetic concern and potentially shorten bulb life.
• Brake Light Switch Issues: Occasionally, a faulty brake light switch can cause brake lights to remain on, not illuminate, or trigger dashboard warnings. This is less about the bulb itself and more about the control circuit.

Find a trusted shop on Repairius.