2024 Jeep Cherokee Transmission & Axle Gear Ratios
Working on this 2024 Jeep Cherokee? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick answer — 2024 Jeep Cherokee
- 3.73
- 2.4L Tigershark MultiAir 2 (FWD)
- 4.08
- 2.0L Turbo I4 (4x4)
From the table below. Confirm with your owner's manual for your exact engine.
Transmission gear ratios
For the 2024 model year, the Jeep Cherokee offers a single transmission option across its available powertrains.
ZF 9HP48 9-Speed Automatic Transmission
This 9-speed automatic transmission is found in all 2024 Jeep Cherokee models, regardless of engine choice (2.4L Tigershark MultiAir 2, 3.2L Pentastar V6, or 2.0L Turbo I4).
| Gear | Ratio |
|---|---|
| 1st | 4.70 |
| 2nd | 2.84 |
| 3rd | 1.91 |
| 4th | 1.38 |
| 5th | 1.00 |
| 6th | 0.81 |
| 7th | 0.70 |
| 8th | 0.58 |
| 9th | 0.48 |
| Reverse | 3.81 |
Available axle ratios
The 2024 Jeep Cherokee offers a few different axle ratios depending on the trim level, engine, and drivetrain (FWD or 4x4).
| Ratio | Available With | RPO/Axle Code | Best For |
|---|---|---|---|
| 3.73 | 2.4L Tigershark MultiAir 2 (FWD) | DM8 (FWD) | Balanced |
| 3.73 | 3.2L Pentastar V6 (4x4) | DM9 (4x4) | Balanced/Towing |
| 4.08 | 2.0L Turbo I4 (4x4) | DME (4x4) | Towing/Off-road |
It's important to note that specific axle ratios might be tied to certain packages or trim levels like the Trailhawk, which is often equipped with axle ratios optimized for off-road performance and towing.
How to identify your axle ratio
Identifying the axle ratio in your 2024 Jeep Cherokee is crucial for proper maintenance, part replacement, and understanding your vehicle's capabilities. Unlike some other manufacturers, Stellantis (parent company of Jeep) often places the axle code on a build sticker. For the Jeep Cherokee, your best bet is usually a sticker located on the underside of the hood, inside the glovebox, or potentially on the driver's side door jamb. Look for a three-digit RPO (Regular Production Option) code. This code will correspond to the axle ratio.
If you cannot locate a physical sticker, you can also try a VIN decoder tool online or by contacting a Jeep dealership's parts department with your VIN. They can often provide you with the exact build sheet for your vehicle, which will detail the installed axle ratio.
The axle itself may not have a tag easily visible without getting under the vehicle and cleaning off potential grime. However, since the Cherokee uses an independent rear suspension, the differential unit itself might have a tag, though relying on the RPO sticker or VIN decoder is generally more reliable and accessible.
Towing vs MPG impact
The axle ratio significantly impacts both towing capability and fuel economy. It's a trade-off: what you gain in one, you typically lose in the other.
-
Numerically Lower Ratios (e.g., 3.73): A numerically lower axle ratio means the engine will spin fewer revolutions per minute (RPM) for a given road speed. This reduces engine workload, especially at highway speeds, leading to better fuel economy. However, it also means less torque multiplication at the wheels, potentially reducing towing capacity and acceleration.
-
Numerically Higher Ratios (e.g., 4.08): Conversely, a numerically higher axle ratio causes the engine to spin at higher RPMs for the same road speed. This increases torque multiplication at the wheels, providing more pulling power for towing heavy loads and improved off-the-line acceleration. The trade-off is often reduced fuel economy, especially during highway driving, as the engine is working harder.
For the Jeep Cherokee, the 4.08 ratio found in some 4x4 models with the 2.0L Turbo engine is geared towards maximizing the towing and off-road capabilities of the vehicle, making the most of the engine's torque. The 3.73 ratios provide a more balanced approach, suitable for daily driving with occasional light towing.
Common issues
While the 2024 Jeep Cherokee is a relatively new model, and widespread common issues related specifically to differential or transmission gear ratios are not yet broadly reported, some general issues can arise in any powertrain system:
-
Ring & Pinion Whine: A howling or whining noise that increases with vehicle speed can indicate wear on the ring and pinion gears within the differential. This can be caused by improper setup, lack of lubrication, or excessive wear.
-
Carrier Bearing Wear: The carrier bearings support the differential carrier. If they wear out, it can lead to play in the differential, causing vibrations or noise, especially during acceleration or deceleration. If neglected, this can lead to more serious differential damage.
-
Limited-Slip Clutch Pack Wear (if equipped): If your Cherokee is equipped with a limited-slip differential (common in some 4x4 or off-road packages), the clutch packs can wear out over time. This can result in a loss of limited-slip functionality or present as chattering or binding noises when turning tightly. Regular fluid changes with the correct friction modifiers are crucial for these differentials.
If you experience any unusual noises, vibrations, or performance issues related to your Cherokee's drivetrain, it's essential to have it inspected by a qualified mechanic to prevent further damage.
Find a driveline shop on Repairius.
Need service on your Jeep Cherokee?
Your vehicle and question are already filled in — just add your location.
More specs for the 2024 Jeep Cherokee
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2024 Jeep Cherokee Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-27.