2020 Jeep Grand Cherokee Wheel Alignment Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Jeep Grand Cherokee? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Angle | Front Pref | Front Range | Rear Pref | Rear Range |
|---|---|---|---|---|
| Camber | -0.4° | -0.9° to 0.1° | -0.5° | -1.0° to 0.0° |
| Caster | 5.0° | 4.0° to 6.0° | N/A | N/A |
| Total Toe | 0.10° | 0.00° to 0.20° | 0.20° | 0.10° to 0.30° |
| Individual Toe | 0.05° | 0.00° to 0.10° | 0.10° | 0.05° to 0.15° |
| SAI | 13.0° | 12.0° to 14.0° | N/A | N/A |
| Thrust Angle | N/A | N/A | 0.0° | -0.15° to 0.15° |
Adjustability
The 2020 Jeep Grand Cherokee has limited factory alignment adjustments.
Front: Only individual toe is adjustable via the tie rod ends. Camber and caster are not adjustable from the factory. To adjust camber and caster, you will need to install aftermarket offset bushings or adjustable ball joints.
Rear: Both camber and individual toe are adjustable. The rear lower control arm has an eccentric cam bolt that allows for camber and toe adjustments.
Recommended adjustment hardware
For the front of the 2020 Jeep Grand Cherokee, a popular option for adding camber and caster adjustment is to install adjustable upper control arms or offset ball joints. Several aftermarket companies, such as SPC and Mevotech, offer kits that provide up to 2 degrees of adjustment.
Symptoms of bad alignment
- Vehicle pulling or drifting: One of the most common symptoms of a bad alignment is the vehicle pulling to one side of the road.
- Uneven tire wear: A bad alignment is a leading cause of premature tire wear. A common pattern is "feathering," where the tire tread blocks are worn unevenly. Another is "cupping," where there are high and low spots on the tire tread. Camber issues often cause wear on the inside or outside edge of the tire.
- Crooked steering wheel: When driving straight, the steering wheel should be centered. If it's off-center, this is a sign of an alignment issue.
When to align
It is recommended to have your alignment checked annually. Additionally, you should have your alignment checked after:
- New tires: To ensure even wear on your new tires.
- Suspension or steering work: Any time a component of the suspension or steering system is replaced, the alignment should be checked.
- Hitting a curb or large pothole: A significant impact can easily throw off your alignment.
Typical alignment cost
The cost of a wheel alignment for a 2020 Jeep Grand Cherokee can vary depending on your location and the shop you choose. A typical four-wheel alignment will cost between $120 and $200. If you need to install aftermarket parts for camber and caster adjustments, the cost will be higher.
Find a trusted alignment shop on Repairius.
More specs for the 2020 Jeep Grand Cherokee
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
2015 Grand Cherokee
2016 Grand Cherokee
2017 Grand Cherokee
2018 Grand Cherokee
2019 Grand Cherokee
2021 Grand Cherokee
Maintenance & repair guides
2020 Jeep Grand Cherokee Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.