2020 Jeep Grand Cherokee Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Jeep Grand Cherokee? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 100 ft-lb / 135 Nm | |
| Oil Drain Plug | 20 ft-lb / 27 Nm | 3.6L V6 |
| Oil Drain Plug | 25 ft-lb / 34 Nm | 5.7L V8 |
| Transmission Drain Plug | 30-40 ft-lb / 41-54 Nm | |
| Front Brake Caliper Bracket Bolts | 130 ft-lb / 176 Nm | |
| Rear Brake Caliper Bracket Bolts | 80 ft-lb / 108 Nm | |
| Front Brake Caliper Slide Pins | 25-30 ft-lb / 34-41 Nm | |
| Rear Brake Caliper Slide Pins | 20-25 ft-lb / 27-34 Nm | |
| Axle Nut | 170-230 ft-lb / 230-312 Nm | |
| Spark Plugs | 18-22 ft-lb / 24-30 Nm | |
| Valve Cover Bolts | 8-10 ft-lb / 11-14 Nm | |
| Intake Manifold Bolts | 8-10 ft-lb / 11-14 Nm |
Wheel lug torque pattern
When tightening the wheel lug nuts on your 2020 Jeep Grand Cherokee, it is crucial to follow a star or cross pattern. This ensures that the wheel is seated evenly against the hub, preventing warping of the brake rotors and ensuring a secure fit. Start with one lug nut, then tighten the one directly across from it. Move to the next lug nut and tighten the one opposite it, continuing until all lug nuts are snug. Finally, lower the vehicle and torque all lug nuts to the final specification in the same star pattern.
Brake torque notes
Brake system fasteners are critical to your safety. The torque specifications for brake components can vary depending on the specific brake package your Grand Cherokee is equipped with (e.g., standard, heavy-duty, or SRT/Trackhawk). The values provided in the quick reference table are for the most common configurations. Always clean and inspect bolts before reassembly, and never reuse torque-to-yield bolts, which are designed to be replaced after a single use.
Why torque matters
Properly tightening fasteners to their specified torque is one of the most critical aspects of vehicle maintenance and repair. Over-tightening can stretch and weaken a bolt, leading to failure. Under-tightening can allow components to loosen over time, which can have catastrophic consequences, especially with critical components like wheels and brakes. Using a calibrated torque wrench is the only way to ensure that fasteners are tightened to the manufacturer's specifications, ensuring a safe and reliable repair.
Disclaimer: The torque specifications provided in this article are for informational purposes only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle configuration. Repairius is not responsible for any damage or injury resulting from the use of this information.
Find a trusted shop on Repairius.
More specs for the 2020 Jeep Grand Cherokee
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
2015 Grand Cherokee
2016 Grand Cherokee
2017 Grand Cherokee
2018 Grand Cherokee
2019 Grand Cherokee
2021 Grand Cherokee
Maintenance & repair guides
2020 Jeep Grand Cherokee Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.