2023 Jeep Grand Cherokee Paint Codes

Quick reference

Where to find your paint code

For most 2023 Jeep Grand Cherokee models, the paint code can be found on a sticker located on the driver's side door jamb. This sticker is typically visible when the driver's door is open. The paint code is usually a three-character alphanumeric code, sometimes preceded by a "P" or "Q". It might be listed under " exterior paint code" or similar wording. Always double-check your VIN with a Jeep dealership or a reputable paint supplier to ensure you have the correct code, especially for unique colors or if the sticker is damaged or missing.

Best touch-up paint sources

When it comes to touching up scratches or chips on your 2023 Jeep Grand Cherokee, several reliable sources can provide you with the correct factory-matched paint:

• Dupli-Color: A widely available brand that offers aerosol spray cans, paint pens, and brush bottles for many automotive colors. You can often find Dupli-Color products at auto parts stores.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint that precisely matches your vehicle's factory color. They offer a wide range of products, including pens, bottles, spray cans, and primers, basecoats, and clear coats.
• Tcoat custom-mix: Tcoat offers high-quality, custom-mixed paint solutions that are designed to perfectly match your vehicle's original finish. They provide various application options to suit your repair needs.
• Dealership: Your local Jeep dealership can order genuine Mopar touch-up paint specifically formulated for your Grand Cherokee. This is often the most accurate match, especially for newer or more complex colors.

How to use touch-up paint

Achieving a seamless touch-up requires a few careful steps:

1. Clean: Thoroughly clean the area to be repaired with soap and water, then an automotive degreaser or rubbing alcohol to remove any wax, grease, or dirt.
2. Primer (if necessary): For deeper scratches or chips that expose bare metal or plastic, apply a thin layer of automotive primer. Allow it to dry completely according to the product instructions.
3. Base Coat: Apply the color (base coat) in several thin layers, allowing each layer to dry for 10-15 minutes before applying the next. Build up the color slowly until it matches the surrounding paint. Feather the edges to blend it in.
4. Clear Coat: Once the base coat is dry, apply two to three thin layers of clear coat to protect the paint and restore the original gloss. Allow each layer to dry before applying the next. After the final clear coat has dried for at least 24 hours, you can gently buff the area to blend it further and remove any imperfections.

Color matching tips for pearls and tri-coats

Colors like Velvet Red Pearl, Diamond Black Crystal Pearl, and Hydro Blue Pearl are multi-stage paint finishes. This means they consist of a base color, followed by a translucent pearl or metallic mid-coat, and then a clear coat. When repairing these types of colors, precise application is crucial:

• Layering is key: Apply the base color first, then very thin, even layers of the pearl or metallic mid-coat until the desired effect and depth are achieved. Too much pearl/metallic can make the repaired area look darker or lighter than the surrounding paint.
• Practice: If you're new to touch-up painting, practice on a hidden area or a piece of scrap metal to get a feel for the application process and how the layers build up.
• Lighting: Always check your work in different lighting conditions (natural daylight, shade) to ensure a consistent match.

If you're unsure about tackling a pearl or tri-coat repair yourself, it's always best to consult with a professional body shop.

Find a trusted body shop on Repairius.