2017 Jeep Wrangler Battery Size & Group

Quick Answer

• BCI Group Size: H7/94R
• CCA Rating: 700-760 CCA is typically recommended, though some premium options may offer more.
• Reserve Capacity: 120-140 minutes
• AGM vs. Flooded: The 2017 Jeep Wrangler can use either an AGM or a flooded battery. AGM is highly recommended for its durability and resistance to vibration, especially given the Wrangler's off-road capabilities.
• Terminal Layout: Top post, typically positioned on opposite corners (positive on the right, negative on the left when looking at the battery from the front).
• Physical Dimensions: Approximately 12.4" L x 6.9" W x 7.5" H
• Dual-Battery Setup: Not applicable for the standard 2017 Jeep Wrangler (not a diesel).

Replacement Battery Options

Here are some popular replacement battery options for your 2017 Jeep Wrangler. Please note that part numbers can vary by retailer and specific battery line, so always double-check compatibility with your supplier.

• Interstate: MTP-94R (Flooded), MTZ-94R (AGM)
• Optima: DH7 YellowTop (AGM)
• DieHard: Platinum AGM Group 94R (AGM)
• Odyssey: ODP-AGM94R H7 L3 (AGM)
• ACDelco: 94RAGM (AGM)

AGM vs. Flooded — Which Does This Vehicle Need?

The 2017 Jeep Wrangler comes from the factory with a standard flooded lead-acid battery. However, it can certainly benefit from an upgrade to an Absorbent Glass Mat (AGM) battery. While not strictly "needed," an AGM battery offers several advantages that are particularly appealing for a vehicle like the Wrangler:

• Durability: AGM batteries are more resistant to vibration and impact, which is a major plus for off-road enthusiasts. The sealed design prevents electrolyte spills, even if the battery casing is damaged.
• Deep Cycling: If you frequently use accessories with the engine off (winches, extensive lighting, camping fridges), an AGM battery's ability to handle deeper discharge cycles without damage is a significant benefit.
• Slower Self-Discharge: AGM batteries hold their charge longer when the vehicle is not in use, making them a good choice if your Wrangler sits for extended periods.
• Consistent Power: They often provide more consistent power output throughout their lifespan.

Considering the typical use of a Jeep Wrangler, investing in an AGM battery is a smart choice for improved reliability and performance, especially if you venture off-road or add aftermarket electrical accessories.

Post-Installation Relearn / Reset Procedure

After replacing the battery in your 2017 Jeep Wrangler, you may notice some minor quirks or warning lights. Most modern vehicles, including the Wrangler, have onboard computer systems that monitor various parameters, and a battery disconnection can sometimes cause them to lose their "learned" settings. Follow these steps to help your vehicle relearn and reset:

1. Start the Engine: Turn the ignition on and allow the engine to run for at least 5-10 minutes without touching the accelerator. This allows the engine control unit (ECU) to re-establish idle parameters.
2. Drive Cycle: Drive the vehicle for a short period (10-15 minutes) under varying conditions (city and highway, if possible). This helps the transmission control module (TCM) and other systems relearn shift points and driving styles.
3. Window Express Up/Down (if applicable): If your power windows have an auto up/down feature and they stop working correctly, hold the window switch down until the window is fully open, then hold it down for an additional 2-3 seconds. Then, pull the switch up until the window is fully closed, and hold it up for an additional 2-3 seconds. Repeat for all windows.
4. Radio Presets: You will likely need to re-enter your radio station presets.
5. Clock: Reset the time on your dashboard clock.

In most cases, any remaining warning lights (like the "check engine" light, if it was related to a voltage issue) will clear themselves after a few drive cycles. If persistent issues or warning lights remain, it's advisable to have your vehicle checked by a professional.

Signs of a Failing Battery

Don't wait for your battery to completely die. Look out for these common signs that your 2017 Jeep Wrangler's battery might be on its way out:

• Slow Engine Crank: The engine turns over sluggishly when you try to start it.
• Dim Headlights/Interior Lights: Lights appear dim when the engine is off or at idle, brightening when you rev the engine.
• Warning Lights: A battery or charging system warning light illuminates on your dashboard.
• Corrosion: Excessive corrosion around the battery terminals can indicate a poor connection or an expiring battery. (Note: A small amount of corrosion is normal over time).
• Swelling Battery Case: The battery case looks swollen or bloated, which can be a sign of internal damage or overcharging.
• Foul Odor: A "rotten egg" smell near the battery can indicate a sulfuric acid leak or internal damage.
• Repeated Jumps: Needing to jump-start your Wrangler frequently.

Common Battery Issues for This Generation

The 2017 Jeep Wrangler (JK generation) is generally reliable, but like any vehicle, its battery can be susceptible to certain issues:

• Accessory Drain: Wranglers are often outfitted with numerous aftermarket accessories (winches, light bars, upgraded sound systems, CB radios). These can put a significant drain on the battery, especially if wired incorrectly or if the vehicle sits for extended periods without being driven.
• Parasitic Drain: Sometimes, a small electrical component can continuously draw power even when the vehicle is off, leading to a dead battery. Diagnosing parasitic drains can be tricky and often requires professional help.
• Off-Road Vibration: Constant vibration from off-roading can accelerate wear and tear on traditional flooded lead-acid batteries, leading to premature failure. This is where an AGM battery truly shines.
• Temperature Extremes: Both extreme heat and cold can impact battery life. Jeeps driven in very hot or very cold climates may experience shorter battery lifespans.

Find a trusted shop on Repairius.