2017 Jeep Wrangler Paint Codes

Quick Reference

Where To Find Your Paint Code

The paint code for your 2017 Jeep Wrangler is located on the driver's side door jamb. Open the driver's door and look for a white sticker on the B-pillar (the vertical post that the door latches to). This sticker contains a variety of information about your vehicle, including the VIN, tire pressure recommendations, and the paint code.

The paint code is a three-character code that is typically preceded by "PNT:". For example, if your Wrangler is painted Firecracker Red, you will see "PNT:PRC" on the sticker. The code may also be listed without the "PNT:" prefix.

Best Touch-Up Paint Sources

Once you have your paint code, you can purchase touch-up paint from a variety of sources. Here are a few of the most popular options:

• Dupli-Color: Dupli-Color is a well-known brand of automotive touch-up paint that is available at most auto parts stores. They offer a variety of applicators, including pens, brush-in-bottle, and aerosol cans.
• AutomotiveTouchup: AutomotiveTouchup is an online retailer that specializes in custom-mixed touch-up paint. They can mix any factory color, and they offer a variety of applicators to suit your needs.
• T-Coat Custom Mix: Many local auto body and paint supply stores can mix custom colors for you in a variety of sizes and applicators. This is a great option if you need a larger quantity of paint or if you want to get a perfect match for a color that has faded over time.
• Jeep Dealership: Your local Jeep dealership can also order touch-up paint for you. This is a good option if you want to be sure that you are getting an exact match for your factory color.

How To Use Touch-Up Paint

Using touch-up paint is a relatively simple process, but it is important to follow the directions carefully in order to get the best results. Here are the basic steps:

1. Clean the area to be repaired: Use a wax and grease remover to clean the area around the scratch or chip. This will ensure that the touch-up paint adheres properly.
2. Apply primer: If the scratch or chip is deep enough to have exposed the bare metal, you will need to apply a coat of primer before applying the touch-up paint. This will help to prevent rust and it will also help the touch-up paint to adhere better.
3. Apply the base coat: Apply a thin coat of touch-up paint to the scratch or chip. Be sure to apply the paint in thin, even coats to avoid runs and drips. It is better to apply several thin coats than one thick coat.
4. Apply the clear coat: Once the base coat is dry, you will need to apply a coat of clear coat. This will protect the base coat and it will also give the repair a glossy finish.

Color Matching Tips for Pearls and Tri-Coats

Pearl and tri-coat paints can be more difficult to match than solid colors. This is because they contain metallic flakes that reflect light in different ways. If you are trying to match a pearl or tri-coat paint, it is important to get a test card from your paint supplier. This will allow you to see how the paint will look in different lighting conditions before you apply it to your vehicle.

If you are not comfortable matching the paint yourself, it is best to take your vehicle to a professional body shop. They will have the experience and the equipment to get a perfect match.

If you are unable to locate your paint code or if you want to be absolutely sure that you are getting the correct color, you can always contact your local Jeep dealership or a paint supplier with your Vehicle Identification Number (VIN). They will be able to look up the correct paint code for your vehicle.

Find a trusted body shop on Repairius.