2018 Jeep Wrangler Paint Color Codes: The Complete Guide

The 2018 Jeep Wrangler is an iconic model year, marking the crossover between the outgoing JK generation and the highly anticipated JL generation. Because of this overlap, Jeep offered an incredible array of exterior paint colors, ranging from classic neutrals to vibrant, head-turning hues like Mojito! and Punk’n Metallic. Whether you are dealing with a minor trail scratch or daily driving rock chips, having the correct paint code is essential for a seamless repair.

Below is your comprehensive guide to 2018 Jeep Wrangler paint color codes, where to find them, and how to apply touch-up paint like a pro.

Quick reference

Here is a list of the factory colors offered for the 2018 Jeep Wrangler (covering both JK and JL generations).

Color Name	Paint Code	Type (Solid / Metallic / Pearl)
Bright White	PW7	Solid
Black	PX8	Solid
Firecracker Red	PRC	Solid
Billet Silver	PSC	Metallic
Granite Crystal	PAU	Metallic
Sting-Gray	PDN	Solid
Ocean Blue	PBM	Metallic
Punk'n	PE4	Metallic
Mojito!	PGE	Pearl/Metallic
Nacho	PY5	Solid
Rhino (JK only)	PSQ	Solid
Gobi (JK only)	PUA	Solid
Chief (JK only)	PQB	Solid
Xtreme Purple (JK only)	PHG	Pearl

Note: If you are uncertain about a specific color variant, always confirm your paint code via your VIN at a local Jeep dealership or a trusted paint supplier.

Where to find your paint code

To guarantee a perfect match, you need to locate the physical paint code on your Jeep. For the 2018 Jeep Wrangler, this information is located on the vehicle’s Service Parts Identification sticker (also known as the vehicle information label).

1. Check the Driver’s Side Door Jamb: Open the driver's side door and look at the B-pillar (the frame where the door latches) or the edge of the door itself.
2. Read the Label: You are looking for a sticker that contains the VIN, tire pressure info, and bar codes.
3. Locate the Code: Find the line that reads "PNT:" followed by a three-digit code (e.g., PNT: PW7 for Bright White).

If the sticker is missing, illegible, or the doors have been replaced, you can call any local Jeep dealership parts department. Provide them with your 17-digit VIN, and they can look up your exact factory paint code in their system.

Best touch-up paint sources

Once you have your three-digit code, you have a few excellent options for sourcing your touch-up paint:

• Dealer / Mopar OEM: Your local Jeep dealership is often the safest bet for small paint pens and half-ounce brush bottles. Mopar touch-up paint is guaranteed to be an exact factory formula.
• AutomotiveTouchup: Highly recommended for larger repairs. They offer perfectly matched paint in aerosol spray cans, half-ounce bottles, and even bulk pints/quarts for spray guns.
• Dupli-Color: A widely available option found in most auto parts stores. Dupli-Color makes convenient 2-in-1 scratch fix pens that include both the base color and a clear coat in one tool.
• Tcoat Custom-Mix: Great for custom-mixed batches, especially if your Jeep’s paint has experienced slight UV fading and needs to be perfectly blended with the current state of the vehicle's finish.

How to use touch-up paint

Fixing a rock chip or trail scratch requires a bit of patience. Follow these steps for the best results:

1. Clean the Area: Wash the scratch with soap and water, then wipe it down with a wax and grease remover or rubbing alcohol. Ensure there is no loose rust or debris.
2. Primer (If necessary): If the scratch goes down to the bare metal or fiberglass, apply a light coat of automotive primer. Let it dry completely.
3. Apply the Base Coat: Shake your paint pen or bottle vigorously. Apply the base color in thin, light dabs. Do not glob the paint on. Let it dry for 15-20 minutes between coats until the color covers the primer.
4. Apply the Clear Coat: Once the base coat is completely dry (wait at least 30-60 minutes), apply the clear coat. The clear coat protects the paint and provides the glossy finish that matches the rest of your Wrangler.

Color matching tips for pearls and tri-coats

Colors like Mojito! (PGE) and Xtreme Purple (PHG) contain pearl and metallic flakes that make them pop in the sunlight. When touching up these colors, it can be tricky to get the metallic flakes to lay flat.

• Shake well: Metallic and pearl paints separate quickly. Shake the bottle continuously during application.
• Test first: Always test the paint on a piece of scrap metal or cardboard to ensure the color and flake density match before applying it to your Jeep.
• Tri-coats: If your vehicle has a tri-coat paint finish, remember that it requires three distinct layers: a base color, a mid-coat (which holds the pearl effect), and a final clear coat. Ensure you buy a kit that includes all three components for an accurate match.

Find a trusted body shop on Repairius.