2019 Jeep Wrangler Towing Capacity & Payload
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Jeep Wrangler? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
The 2019 Jeep Wrangler can tow up to 3,500 pounds.
Quick answer
- Max Towing Capacity: 3,500 lbs
- Max Payload Capacity: 1,310 lbs
- GVWR: 5,000-5,800 lbs
- GCWR: 8,016-9,079 lbs
- Curb Weight: 3,970-4,490 lbs
- Hitch Receiver Class: Class II
Tow ratings by engine & trim
| Engine | Drivetrain | Trim/Package | Max Tow | Payload |
|---|---|---|---|---|
| 2.0L Turbo I4 | 4x4 | 2-door | 2,000 lbs | 1,221 lbs |
| 3.6L Pentastar V6 | 4x4 | 2-door | 2,000 lbs | 1,233 lbs |
| 2.0L Turbo I4 | 4x4 | 4-door | 3,500 lbs | 1,189 lbs |
| 3.6L Pentastar V6 | 4x4 | 4-door | 3,500 lbs | 1,189 lbs |
Tow package contents
The available Trailer-Tow and Heavy-Duty Electrical Group for the 2019 Jeep Wrangler includes a Class II hitch receiver, a 7-pin and 4-pin wiring harness, and a 240-amp alternator. A transmission cooler is not explicitly included in this package, but the Wrangler's robust cooling system is designed to handle the stresses of towing within its rated limits. Trailer sway control is a standard feature on all 2019 Wranglers and is integrated with the vehicle's electronic stability control system. An integrated brake controller is not available from the factory on the 2019 Wrangler.
Weight distribution & WDH requirements
For trailers exceeding 2,000 pounds, a weight-distribution hitch (WDH) is recommended to improve handling and stability. A WDH helps to distribute the trailer's tongue weight more evenly across the vehicle's axles, which can help to prevent trailer sway and improve braking performance. The maximum tongue weight for a 2019 Jeep Wrangler is 350 pounds.
Real-world towing tips for this vehicle
When towing with a 2019 Jeep Wrangler, it is important to be mindful of the vehicle's shorter wheelbase, which can make it more susceptible to trailer sway than longer-wheelbase vehicles. It is also important to use a WDH for heavier trailers and to properly balance the trailer's load. Additionally, be sure to allow for extra stopping distance and to use a lower gear when driving in hilly terrain.
Common towing-related issues
Some common towing-related issues that 2019 Jeep Wrangler owners have reported include trailer sway, reduced fuel economy, and transmission overheating. Trailer sway can be mitigated by using a WDH and by properly balancing the trailer's load. Reduced fuel economy is to be expected when towing, but it can be minimized by driving at a moderate speed and by avoiding aggressive acceleration. Transmission overheating can be a concern when towing in hot weather or in hilly terrain. If you notice your transmission temperature gauge climbing, it is important to pull over and let the vehicle cool down.
Find a trusted shop on Repairius.
More specs for the 2019 Jeep Wrangler
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Jeep Wrangler Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.