2019 Jeep Wrangler Wiper Blade Sizes & Replacement Guide

Visibility is critical when you are out on the trail or just navigating daily traffic in your 2019 Jeep Wrangler. Having the correct wiper blades ensures your windshield stays clear of mud, rain, and snow. Whether you are driving the 2-door or 4-door Unlimited JL, replacing your wiper blades is a simple, cost-effective maintenance item you can easily handle yourself.

Here is your complete guide to the wiper blade sizes, attachments, and replacement options for the 2019 Jeep Wrangler.

Quick reference

Use this quick reference table to find the exact wiper blade lengths and OEM Mopar part numbers for your 2019 Jeep Wrangler.

Position	Length (in)	Length (mm)	Attachment	OEM PN
Driver	16"	400mm	J-Hook	68285573AA
Passenger	16"	400mm	J-Hook	68285573AA
Rear (Hardtop)	13"	330mm	Specialty / Snap-in	68285648AA

Note: The rear wiper is only equipped on models with the factory hardtop. Soft top models do not utilize a rear wiper.

Best aftermarket replacements

If you prefer to upgrade from the standard factory Mopar blades, there are several top-tier aftermarket options. Because the Wrangler has a very upright windshield, premium beam-style blades are highly recommended to resist wind lift at highway speeds.

• Bosch ICON: (Premium Price) The gold standard for beam blades. Known for excellent longevity and tension distribution, keeping them flat against the flat Wrangler glass.
• Rain-X Latitude: (Premium Price) Applies a water-repellent coating directly to the windshield as it wipes. Excellent for heavy rain.
• PIAA Si-Tech: (Premium Price) Silicone wiper blades that resist UV and ozone degradation better than standard rubber, making them perfect for sunny, off-road climates.
• Trico Force: (Mid-Range Price) Features a swept-wing spoiler designed specifically to reduce wind lift.
• Michelin Stealth: (Mid-Range Price) A hybrid blade offering the durability of a traditional frame with a sleek, snow-shedding cover.

Attachment style

The 2019 Jeep Wrangler utilizes the incredibly common standard J-hook (9x3mm) attachment for both the driver and passenger front wiper arms. This makes finding aftermarket replacements very easy, as virtually every brand supports the J-hook style out of the box.

The rear wiper (on hardtop models) uses a proprietary snap-in/ROC Lock style attachment. While some aftermarket companies make a direct-fit rear blade, many Wrangler owners find it easiest to simply purchase the OEM Mopar replacement for the rear to guarantee a perfect fit under the spare tire.

How to install

Replacing the front wiper blades on your 2019 Jeep Wrangler takes only a couple of minutes.

1. Pull the wiper arm away from the windshield until it locks into the upright position.
2. Locate the small release tab on the underside of the wiper blade where it meets the J-hook.
3. Press the tab and push the blade down toward the base of the wiper arm to slide it out of the hook.
4. Remove the old blade.
5. Take your new blade, slide the J-hook into the adapter, and pull it upward until you hear a distinct "click."
6. Gently lower the wiper arm back onto the windshield.

For the rear wiper, simply lift the arm slightly, rotate the blade outward away from the arm, and snap it out of the C-shaped retaining clip. Snap the new one firmly back into the center pin.

When to replace

Wiper blades are made of rubber that naturally degrades over time due to UV exposure, ozone, and temperature changes. You should plan to replace your wiper blades every 6 to 12 months.

Watch for these common signs that your blades are due for a swap:

• Streaking: Leaving bands of water across the glass.
• Chattering: The blade skipping or stuttering across the windshield, which is common on the Wrangler's upright glass when rubber hardens.
• Squeaking: Unusually loud rubber friction noises.
• Tearing: Visible splits or cracks in the rubber squeegee.

Need wipers swapped fast? Find a shop on Repairius.