2020 Kenworth T680 Paint Color Codes

Quick Reference

Where to Find Your Paint Code

For your 2020 Kenworth T680, the paint code is typically located on the driver's side door jamb. Look for a sticker or plate that contains various vehicle information, including the VIN. The paint code is usually clearly labeled and may be a combination of letters and numbers. In some cases, it might also be found under the hood, often on a sticker near the firewall or radiator support. If you have any difficulty locating it, your Kenworth dealer can provide the precise code using your truck's Vehicle Identification Number (VIN).

Best Touch-Up Paint Sources

When it comes to maintaining the pristine finish of your 2020 Kenworth T680, several reliable sources offer quality touch-up paint:

• Dupli-Color: A widely available brand offering a broad spectrum of colors in various forms, including pens, bottles, and aerosol cans. Check their website or local auto parts stores for a match.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint to precisely match your vehicle's factory color. They offer paint in pens, bottles, spray cans, and larger quantities, ensuring a near-perfect match for your Kenworth.
• Tcoat Custom-Mix: For a truly bespoke solution, Tcoat can custom-mix paint based on your specific paint code, providing an excellent match for even less common or specialized Kenworth colors.
• Kenworth Dealerships: Your local Kenworth dealer is an excellent resource for genuine factory-matched touch-up paint. Providing them with your VIN can ensure you get the exact color formulation.

How to Use Touch-Up Paint

Achieving a professional-looking repair with touch-up paint involves a few key steps:

1. Clean the Area: Thoroughly clean the damaged area with soap and water, then degrease it with rubbing alcohol to remove any wax or contaminants. This ensures proper adhesion.
2. Apply Primer (Optional but Recommended): For deeper scratches or chips that have gone down to the bare metal, apply a thin layer of primer. Allow it to dry completely according to the product instructions.
3. Apply Base Coat: Shake the touch-up paint well. Apply thin, even coats of the base color, allowing each coat to dry for 10-20 minutes before applying the next. Build up the color gradually until it matches the surrounding paint.
4. Apply Clear Coat: Once the base coat is dry, apply a clear coat to protect the paint and provide a glossy finish. Apply in thin layers, allowing sufficient drying time between coats.
5. Cure and Polish: Allow the touch-up paint to cure completely (this can take several days). Once cured, you can gently wet-sand with very fine-grit sandpaper (2000-3000 grit) to smooth out any imperfections, followed by a polishing compound to restore the shine.

Color Matching Tips for Pearls and Tri-Coats

While the 2020 Kenworth T680 primarily featured solid and some metallic finishes, if you happen to have a custom or special order finish that is a pearl or tri-coat, matching can be more complex:

• Pearl Colors: These colors contain mica particles that create a shimmering effect. Touch-up paint for pearl finishes usually comes in multiple stages (a base color and a pearl mid-coat). It's crucial to apply these layers correctly to achieve the desired effect.
• Tri-Coat Colors: As the name suggests, these involve three distinct layers: a colored ground coat, a translucent mid-coat (often pearl or metallic), and a clear coat. Matching tri-coats requires precise application of each layer to ensure the color and depth are correct. It's advisable to practice on an inconspicuous area first.

For any complex colors or if you are unsure about your paint code, it is always best to verify with a Kenworth dealership using your VIN or consult with a specialized automotive paint supplier. They can provide the most accurate color formulation for your specific truck.

Find a trusted body shop on Repairius.