2014 Kenworth W900 Paint Codes

Quick reference

Where to find your paint code

For most 2014 Kenworth W900 trucks, the paint code can be found on the manufacturer's label located on the driver's side door jamb. This sticker typically contains vital information about your truck, including the VIN, gross vehicle weight ratings (GVWR), and the exterior paint code. The paint code is usually clearly labeled, often with a "Paint" or "EXT PNT" heading, followed by a series of letters and numbers. Sometimes, it might be a three- or four-digit code beginning with "L," "M," "R," "W," "G," "Y," or "T".

If you have trouble locating it, you can also check the glove box or consult your owner's manual. If all else fails, a Kenworth dealerparts department can provide the precise paint code using your truck's VIN.

Best touch-up paint sources

When it comes to sourcing touch-up paint for your 2014 Kenworth W900, several reputable options offer excellent color matches and quality products:

• Dupli-Color: A widely available brand that offers a good selection of automotive touch-up paints in various forms, including brushes, pens, and spray cans. They are a good option for minor chips and scratches.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint for all makes and models. You can order paint precisely matched to your Kenworth's paint code, ensuring a very close match. They offer various product sizes, from small bottles to aerosol cans.
• Tcoat Custom-Mix: Tcoat is another excellent online resource for precisely matched automotive paints. They often have a wider array of colors, including those that might be harder to find. Provide them with your Kenworth's paint code for an accurate mix.
• Kenworth Dealership: For the most accurate and factory-approved paint, your local Kenworth dealership parts department can provide OEM touch-up paint. This is often the best choice for exact color matching, especially for complex colors.

How to use touch-up paint

Using touch-up paint correctly can make a big difference in the final appearance:

1. Clean the Area: Thoroughly clean the chipped or scratched area with soap and water, then an automotive degreaser or rubbing alcohol. Ensure it's completely dry.
2. Apply Primer (Optional but Recommended): For deeper scratches or chips that expose bare metal, apply a thin layer of automotive primer. Allow it to dry completely according to product instructions.
3. Apply Base Coat: Shake the touch-up paint thoroughly. Apply thin, even coats of the base color, allowing each coat to dry before applying the next. Build up the color gradually until it matches the surrounding paint.
4. Apply Clear Coat: Once the base coat is dry, apply a clear coat. This protects the paint and provides a glossy finish. Again, apply thin, even coats and allow drying time between each.
5. Wet Sand and Polish (Optional): For a truly seamless repair, you can gently wet sand with very fine-grit sandpaper (e.g., 2000-grit) after the clear coat has fully cured, followed by polishing to blend the repair with the surrounding paint.

Color matching tips for pearls and tri-coats

While the 2014 Kenworth W900 primarily featured solid and metallic finishes, if you encounter a pearl or tri-coat finish (which often involves multiple layers of paint to achieve depth and shimmer), color matching becomes more critical. Always follow the specific instructions provided with pearl or tri-coat touch-up kits, as they will typically involve applying multiple distinct layers (e.g., ground coat, mid-coat pearl, clear coat). The order and technique of application are crucial for achieving the desired effect and accurate color match.

When in doubt, especially with complex paint jobs or significant damage, it's always best to consult with a professional body shop. For the most accurate color match for any color, especially if it's not one of these specific codes, always confirm using your truck's VIN at a Kenworth dealer or reputable paint supplier.

Find a trusted body shop on Repairius.